Re: my treo won't sync

From: Bret Comstock Waldow (bwaldow_at_alum.mit.edu)
Date: 07/31/03

  • Next message: Ron Johnson: "Re: Realtek RTL8139 PCI Fast Ethernet Adapter" 
    To: Tom Vier <tmv@comcast.net>
Date: 31 Jul 2003 00:24:23 -0400

    On Wed, 2003-07-30 at 23:24, Tom Vier wrote:
    > i've tried both pilot-xfer (from pilot-link) and kpilot. neither recongizes
    > it. my visor platinum works fine. there is the minor problem of the usb char
    > dev not showing up til you hit the button. if i run pilot-xfer right after
    > hitting the sync button, it works for the visor. treo just isn't seen.
    >
    > does anyone have any tips? this is a treo 90.

    I don't have a lot of knowledge about Treo, but some things to consider
    from my Visor days:

    You need a module to sync, it's somewhat specific to the hardware. The
    Visor used the visor.o module, and my current Clie uses the same. I
    don't know what's the right one for your Treo, but you need to look for
    that.

    USB loads the module when the sync button is pressed. Pressing the
    button effectively plugs a new device into the USB bus, the hotplug
    scripts recognize it (or don't) and load the appropriate module (or
    don't).

    So, you need to have the module, and you need to have the hotplug
    scripts installed, and you need to have them configured to recognize the
    Treo device when it appears on the USB bus and load the proper module.

    Have you Googled on the topic?

    Cheers,
    Bret 

    -- 
bwaldow at alum.mit.edu
-- 
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
  • Next message: Ron Johnson: "Re: Realtek RTL8139 PCI Fast Ethernet Adapter"