Getting Radio/TV on Debian.

From: Russ Pitman (rjp_at_belle.apana.org.au)
Date: 09/16/03

  • Next message: Wolfgang Lonien: "Re: Improved responsiveness: Galeon over remote X11"
    Date: Tue, 16 Sep 2003 13:27:17 +0800
    To: debian-user@lists.debian.org
    
    

    Having been given Radio/TV card and finding it is working, I have had no
    success so far installing it in my Debian m/c running Sid,currently
    uptodate.

    The card is a Prolink Pixelview Play TV Pak modelPV-Bt878P+ Rev4E
    From the cardlist No.50 an exact match
    The tuner is an LG TPI8PSB02P Cardlist No.28

    Inserting the bttv module using parameters indicated in the bttv
    Documentation - card=50 tuner=28 radio=1 pll=0 -.

    modconf produces
    ---------
    Installing module bttv. If the device isn't there, or isn't configured
    correctly, this could cause your system to pause for up to a minute.

    i2c-algo-bit.o: i2c bit algorithm module
    bttv: driver version 0.7.107 loaded
    bttv: using 4 buffers with 2080k (8320k total) for capture
    bttv: Host bridge is Silicon Integrated Systems [SiS] 745 Host
    bttv: Bt8xx card found (0).
    PCI: Found IRQ 5 for device 00:0a.0
    PCI: Sharing IRQ 5 with 00:0a.1
    bttv0: Bt878 (rev 17) at 00:0a.0, irq: 5, latency: 32, mmio: 0xfb000000
    bttv0: using: BT878(Prolink PV-BT878P+4E / ) [card=50,insmod option]
    i2c-core.o: adapter bt848 #0 registered as adapter 0.
    bttv0: using tuner=28
    bttv0: i2c: checking for Bt832 @ 0x88... not found
    bttv0: i2c: checking for Bt832 @ 0x8a... not found
    bttv0: i2c: checking for TDA9875 @ 0xb0... not found
    bttv0: i2c: checking for TDA7432 @ 0x8a... not found
    i2c-core.o: driver i2c TV tuner driver registered.
    tuner: chip found @ 0xc2
    tuner: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
    i2c-core.o: client [LG PAL_BG+FM (TPI8PSB01D)] registered to adapter [bt848
    #0](pos. 0).
    bttv0: registered device video0
    bttv0: registered device vbi0
    bttv0: registered device radio0
    Using /lib/modules/2.4.22/kernel/drivers/media/video/tuner.o
    insmod: a module named tuner already exists
    /lib/modules/2.4.22/kernel/drivers/media/video/bttv.o: post-install bttv
    failed
    /lib/modules/2.4.22/kernel/drivers/media/video/bttv.o: insmod bttv failed

    Installation failed.
    ---------------------
    Prior to running modconf there was no tuner module installed

    After running modconf.

    ---------------------------
    root@belle:~# lsmod
    Module Size Used by Not tainted
    tuner 10664 1 (autoclean)
    bttv 95200 0 (unused)
    i2c-algo-bit 7432 1 [bttv]
    apm 9988 0 (autoclean)
    nls_iso8859-1 2876 1 (autoclean)
    nls_cp437 4380 1 (autoclean)
    tvaudio 14056 0 (unused)
    es1371 26156 1
    ac97_codec 13428 0 [es1371]
    soundcore 3844 4 [bttv es1371]
    vga16fb 9952 0 (unused)
    fbcon-vga-planes 3240 0 [vga16fb]
    8139too 14952 1
    mii 2464 0 [8139too]
    crc32 2880 0 [8139too]
    smbfs 38704 0 (unused)
    nfsd 72816 0 (unused)
    nfs 71036 0 (unused)
    lockd 50896 0 [nfsd nfs]
    sunrpc 67840 0 [nfsd nfs lockd]
    lp 6144 0
    rtc 6792 0 (autoclean)
    --------------------
    So insmod failed but the modules were inserted anyway?
    Something seems broken or badly bent.

    Running lspci
    -----------------
    root@belle:~# lspci
    00:00.0 Host bridge: Silicon Integrated Systems [SiS] 745 Host (rev 01)
    00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual
    PCI-to-PCI bridge (AGP)
    00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
    Bridge)
    00:02.2 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
    Controller (rev 07)
    00:02.3 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
    Controller (rev 07)
    00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
    00:09.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
    00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video
    Capture (rev 11)
    00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
    (rev 11)
    00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
    RTL-8139/8139C/8139C+ (rev 10)
    01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2
    Model 64/Model 64 Pro] (rev 15)
    -------------------
    In any event neither the 'radio' app. from xawtv or 'gradio', GtK app can
    detect transmissions. xawtv can only see noise.

    The card works fine on radio on win98 temporarily installed on another
    partition on the same drive. Tv only shows noise there also tho' I have not
    tried to tweak anything there . Not really interested enough.

    If anyone is sucessfully using this card on Debian I would be very grateful
    to hear from them.

    -- 
    Cheers
    Russ.
    -- 
    To UNSUBSCRIBE, email to debian-user-request@lists.debian.org 
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
    

  • Next message: Wolfgang Lonien: "Re: Improved responsiveness: Galeon over remote X11"

    Relevant Pages

    • Re: HX stuff wanted/needed
      ... > AFAIK for many I/O cards, the HX needs a DMA controller. ... The DMA chip is on the memory card; if you got one, ... What's the tradeoff between installing a drive in the B drive ... Your controller will need to use IRQ 2. ...
      (comp.sys.tandy)
    • Re: Problem installing 1394 card in WinXP
      ... The card is recycled from my previous machine. ... showed up as the "VIA OHCI compliant IEEE 1394 controller" from ... Microsoft - I believe the driver file is 1394bus.sys. ... I can't seem to coax XP into installing the appropriate ...
      (microsoft.public.windowsxp.hardware)
    • Re: Goodbye ASUS, Hello Gigabyte
      ... the disk controller. ... the board was a little shorter than the ASUS board was ... My board has two chassis fan plugs while the asus board had only one. ... a long video card, it will block the IDE connector. ...
      (comp.os.os2.setup.misc)
    • Re: Karen Suadela questions (LSJ)
      ... she is immune to Gehenna but her controller isn't (or something ... the card at all. ... If she diablerizes a younger vampire, ... During each Methuselah's discard phase, he or she burns X pool, where X is ...
      (rec.games.trading-cards.jyhad)
    • Re: VAX Server 4000/200 not seeing its drive
      ... > That controller card is a third party controller card, ... have several such systems with just a Wren disk and 8mm tape drive ... "We used to buy third party boards from Trimarchi, ...
      (comp.os.vms)