Re: Can't connect with my new ADSL

From: Anthony Campbell (ac_at_acampbell.org.uk)
Date: 12/11/03

  • Next message: David Baron: "Re: Can't connect with my new ADSL"
    Date: Thu, 11 Dec 2003 08:41:01 +0000
    To: debian-user@lists.debian.org
    
    

    On 11 Dec 2003, Antony Gelberg wrote:
    >
    > ----- Original Message -----
    > From: "Anthony Campbell" <ac@acampbell.org.uk>
    > To: <debian-user@lists.debian.org>
    > Sent: Wednesday, December 10, 2003 11:31 PM
    > Subject: Re: Can't connect with my new ADSL
    >
    >
    > > On 10 Dec 2003, Antony Gelberg wrote:
    > > > Please reply to the list in future. You type in http://10.0.0.2 where
    > you
    > > > would usually type the website name. (Website names generally can be
    > > > exchanged for IP addresses, if you know the address.)
    > > >
    > > > A
    > >
    > > I tried this but no luck. The support people suggested installing dhcp,
    > > which I have done, and also tried:
    > >
    > > /sbin/ifconfig eth0 10.0.0.2 netmask 255.0.0.0
    > >
    > > and
    > >
    > > /sbin/route add default gw 10.0.0.1
    > >
    > > (suggestions from uklinux support).
    > >
    > > But still nothing much seems to happen. I still couldn't connect via the
    > > browser.
    >
    > I hope you didn't install dhcpd (i.e. the dhcp server)? AFAIK, in order to
    > act as a DHCP client, Debian needs no additional packages installed.
    >
    > If you set up /etc/network/interfaces correctly, it should do the above
    > steps for you (with reference to the /sbin commands). man interfaces for
    > details. You want the router to act as a DHCP server, so you don't need to
    > assign an IP address to your machine. After doing that, can you ping
    > 10.0.0.2? That's the first thing to try, before trying any fancy browser
    > stuff. Perhaps you could post output of ifconfig?
    >
    Will do.

    > Infact, after re-reading what "technical support" told you, it's a load of
    > crap. If the router's default address is 10.0.0.2, then _that_ should be
    > your gateway and your PC should be something else (say 10.0.0.10). But
    > anyway, forget the above, concentrate on /etc/network/interfaces. DHCP
    > means not needing to worry about IP addresses as much.
    >
    > A
    >
    > PS Having seen your website, my "fee" for this advice would be your
    > recommendation on the best way to help my neck, shoulders, and back, which
    > are usually stiff and in pain from years of bad PC posture. I've had
    > physio, but it only treats the symptoms. Is Pilates any good? <grin>

    Many thanks to you and Brian for your comments. After reflecting on
    these and a night's sleep I think I've finally understood what is at
    issue here. Up to now I was thinking in terms of setting up a normal
    modem, e.g. via pppconfig. I now think instead that the aim is to get
    the LAN to work and then direct a browser to 10.0.0.2 (the correct
    address according to the manual). Is this broadly correct?

    Matters have not been helped by the manual, which I thought was
    difficult owing to being too technical. I've now realized that much of
    the difficulty is due to its being written by someone (Chinese?) with a
    reasonable but imperfect command of English.

    PS. (OT) As for your neck and shoulders: I don't know much about Pilates
    though it's very fashionable at present. Physical treatments such as
    acupuncture or manipulation can help for a time but the pain will keep
    recurring as long as you spend many hours at the keyboard advising
    ignorant people like me :) . I think the only viable solution is what
    you don't want to hear: to get out more and take more exercise (swimming
    can be good, preferably on your back). Also, while working at the
    keyboard you should shrug your shoulders and move your head through a
    full range in both planes (but don't swing it in circles). Do this
    *before* the pain occurs - perhaps every 20 or 30 min. (Make the
    computer send you a reminder.)

    The following exercise could also help if done twice daily: find a
    suitable doorway, place your hands on each side of the gap, and move
    your chest forward through the doorway. The idea is to stretch the
    pectoral muscles on the front of the chest, which oddly enough can
    relieve neck pain.

    Anthony

    -- 
    ac@acampbell.org.uk    ||  http://www.acampbell.org.uk
    using Linux GNU/Debian ||  for book reviews, electronic 
    Windows-free zone      ||  books and skeptical articles
    -- 
    To UNSUBSCRIBE, email to debian-user-request@lists.debian.org 
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
    

  • Next message: David Baron: "Re: Can't connect with my new ADSL"

    Relevant Pages

    • Re: NTVDM Hard Error when upgrading ISA2000 to ISA2004 via SP1 Premium CDs
      ... The only other issue is a DHCP problem that appears to be affecting more ... ISA2004 is installing now. ... Dave Hampson ... > Microsoft CSS Online Newsgroup Support ...
      (microsoft.public.windows.server.sbs)
    • Added 2nd NIC. Cannot start DHCP server. "Cannot find the DHCP Ser
      ... Network was working fine with a single NIC, router/gateway, DSL modem config. ... since installing the 2nd NIC, 1) I can access the Internet from the SBS but ... cannot access from the clients, 2) clients don't see the SBS, 3) when I ... the wizard can't set tghe DHCP scope options. ...
      (microsoft.public.windows.server.sbs)
    • Re: Newbie first-time install advice: Highpoint Rocket 133SB
      ... The SpeedStream modem works no problem ... For reference when I get around to installing, ... It sort of sounds like you already had a running system, with the DHCP ... that work well if the stable CDs can't get it done!) ...
      (Debian-User)
    • Re: SP1 causing problems
      ... >rid of all that stuff by installing AdAware and Spybot S&D from a CD. ... >to install Windows SP1 update. ... motherboard drivers for laptop to replace generic ones installed by ... If DHCP and there's no DHCP server, ...
      (microsoft.public.windowsxp.general)
    • Re: NAT gateway setup problem
      ... sounds like you already have plenty of pain, so carry on if you must. ... if you don't like how ics handles dhcp and dns you may want to look at one ... > so ICS is likely to cause more pain than worth... ...
      (microsoft.public.win32.programmer.networks)