Re: Realtek rtl8139 nic and 2.4.20 kernel

From: Charles Muller (acmuller_at_gol.com)
Date: 12/26/03

  • Next message: Russ Schneider: "Re: Finding I/O For ISA NIC Card?" 
    Date: Sat, 27 Dec 2003 01:15:05 +0900 (JST)
To: debian-user@lists.debian.org

    Uwe Dippel wrote:

    > How about showing us your cat /etc/modules and ifconfig for a change
    > to the better ?

    These are as follows:

    debian:/home/chuck# cat /etc/modules
    # /etc/modules: kernel modules to load at boot time.
    #
    # This file should contain the names of kernel modules that are
    # to be loaded at boot time, one per line. Comments begin with
    # a "#", and everything on the line after them are ignored.

    unix
    af_packet
    8139too
    vfat
    usb-storage
    scanner
    dc2xx

    debian:/home/chuck# ifconfig
    eth0 Link encap:Ethernet HWaddr 00:90:F5:1F:3B:BA
              UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:100
              RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
              Interrupt:11 Base address:0x2000

    lo Link encap:Local Loopback
              inet addr:127.0.0.1 Mask:255.0.0.0
              UP LOOPBACK RUNNING MTU:16436 Metric:1
              RX packets:338 errors:0 dropped:0 overruns:0 frame:0
              TX packets:338 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:17668 (17.2 KiB) TX bytes:17668 (17.2 KiB)

    debian:/home/chuck#

    Thanks for helping.

    Chuck

    ----------------------------

    Charles Muller
    Toyo Gakuen University
    Faculty of Humanities
    1660 Hiregasaki, Nagareyama-shi
    Chiba 270-0161, JAPAN

    Web Resources for East Asian Language and Thought
    http://www.acmuller.net 

    -- 
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
  • Next message: Russ Schneider: "Re: Finding I/O For ISA NIC Card?"

    Relevant Pages

    • Re: OpenGL glxgears demo program
      ... kernel modules to load at boot time. ... This bug may be similar and suggests blacklisting edac, ...
      (Ubuntu)
    • Re: GenesysLogic USB2.0 PCCamera nicht gefunden
      ... den aus der /etc/modules löschen oder kommentieren. ... kernel modules to load at boot time. ...
      (de.comp.os.unix.linux.misc)
    • Re: USB to ethernet adapter
      ... How can I install it? ... kernel modules to load at boot time. ...
      (comp.os.linux.misc)
    • Re: MAKEDEV and CentOS -- cdrecord.
      ... # /etc/modprobe.preload: kernel modules to load at boot time. ... "Lost? ...
      (comp.os.linux.setup)
    • Re: [opensuse] How to set up LIRC?
      ... and if not then loading it and setting it to load at boot time. ... I Googled around and learned a bit about loading kernel modules but nothing answered this question. ... Well further Google attempts and a visit to the LIRC website seemed to indicate that I need another module loaded in the kernel called lirc_serial. ...
      (SuSE)