Re: Drives are not being detected
From: Kevin Mark (kmark+debian-user_at_pipeline.com)
Date: 12/31/03
- Previous message: Lucas Bergman: "Re: messages in mutt: \225 etc"
- In reply to: Andy Gayton: "Drives are not being detected"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Wed, 31 Dec 2003 10:54:46 -0500 To: debian-user@lists.debian.org
On Wed, Dec 31, 2003 at 01:16:36PM +1000, Andy Gayton wrote:
> I'm running stable woody 3.0r2.
>
> I originally installed the machine with 2 hard drives on the primary ide
> controller and a cd drive as master on the secondary controller. I
> installed off cd and everything came up fine.
> I've now tried to add a third hard drive onto the secondary ide controller.
> I think I got the master/slave settings conflicting when I first tried to
> bring the system up - I didn't have a monitor on the box when bringing it
> up the first couple times. The box came up ok and the 2 drives on the
> primary controller were all good, but nothing from the secondary
> controller. I put a monitor on to see what was going on, the bios was
> detecting everything ok, but I still couldn't see anything from inside of
> linux for the secondary controller. The bios was displaying this message:
>
> secondary ide channel no 80 conductor cable installed
<snip>
>
> Which looks like I should be using a different cable, but shouldn't stop
> things from working?
Hi Andy,
I'd really check the drive jumpers. Just to be 200% sure that they are
setup correctly!
-Kev
-- To UNSUBSCRIBE, email to debian-user-request@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
- application/pgp-signature attachment: Digital signature
- Previous message: Lucas Bergman: "Re: messages in mutt: \225 etc"
- In reply to: Andy Gayton: "Drives are not being detected"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
