Re: CD Writer does not work for audio CD

From: DGLU TR (tony_at_the-sphere.org)
Date: 12/31/03

  • Next message: Russ Schneider: "Debian newbie confused over apt and packages" 
    Date: Wed, 31 Dec 2003 14:38:18 -0500
To: debian-user@lists.debian.org

    On Wed, Dec 31, 2003 at 10:00:43PM +0800, Robert Storey wrote:
    > I've always had bad luck with CDBakeoven. Things have worked much better
    > (for me at least) with K3b and XCDRoast.
    >
    > That having been said, before you can get any atapi CD drive to work
    > with cdrecord, you need to enable scsi emulation. It's a (minor) pain,
    > and I've heard that this won't be necessary with the 2.6 kernel, but for
    > the 2.4.x kernel it's required.

    Not really:
     I am using 2.4.22 and burning with atapi, without scsi emulation.

    hpd:/home/tony/work# cdrecord dev=ATAPI -scanbus
    Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003
    J?rg Schilling
    scsidev: 'ATAPI'
    devname: 'ATAPI'
    scsibus: -2 target: -2 lun: -2
    Warning: Using ATA Packet interface.
    Warning: The related libscg interface code is in pre alpha.
    Warning: There may be fatal problems.
    Using libscg version 'schily-0.7'
    scsibus0:
            0,0,0 0) 'JLMS ' 'XJ-HD166S ' 'DPS6' Removable
            CD-ROM
            0,1,0 1) 'HP ' 'DVD Writer 300n ' '1.25' Removable
            CD-ROM
            0,2,0 2) *
            0,3,0 3) *
            0,4,0 4) *
            0,5,0 5) *
            0,6,0 6) *
            0,7,0 7) *

    and then

    hpd:/home/tony/work# cdrecord dev=ATAPI:0,1,0 -v speed=12 bootbf*iso
    Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003
    J?rg Schilling
    TOC Type: 1 = CD-ROM
    scsidev: 'ATAPI:0,1,0'
    devname: 'ATAPI'
    scsibus: 0 target: 1 lun: 0
    Warning: Using ATA Packet interface.
    Warning: The related libscg interface code is in pre alpha.
    Warning: There may be fatal problems.
    Using libscg version 'schily-0.7'
    SCSI buffer size: 64512
    atapi: 1
    Device type : Removable CD-ROM
    Version : 0
    Response Format: 2
    Capabilities :
    Vendor_info : 'HP '
    Identifikation : 'DVD Writer 300n '
    Revision : '1.25'
    Device seems to be: Generic mmc2 DVD-ROM.
    Current: 0x0009
    Profile: 0x001B
    Profile: 0x001A
    Profile: 0x0010
    Profile: 0x000A
    Profile: 0x0009 (current)
    Profile: 0x0008 (current)
    Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
    Driver flags : MMC-3 SWABAUDIO BURNFREE
    Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
    Drive buf size : 1345536 = 1314 KB
    FIFO size : 4194304 = 4096 KB
    Track 01: data 38 MB
    Total size: 43 MB (04:20.29) = 19522 sectors
    Lout start: 44 MB (04:22/22) = 19522 sectors
    Current Secsize: 2048
    ATIP info from disk:
      Indicated writing power: 4
      Is not unrestricted
      Is not erasable
      Disk sub type: Medium Type A, high Beta category (A+) (3)
      ATIP start of lead in: -11077 (97:34/23)
      ATIP start of lead out: 359848 (79:59/73)
    Disk type: Long strategy type (Cyanine, AZO or similar)
    Manuf. index: 11
    Manufacturer: Mitsubishi Chemical Corporation
    Blocks total: 359848 Blocks current: 359848 Blocks remaining: 340326
    Starting to write CD/DVD at speed 8 in real TAO mode for single
    session.
    Last chance to quit, starting real write 0 seconds. Operation
    starts.
    Waiting for reader process to fill input buffer ... input buffer
    ready.
    BURN-Free is ON.
    Turning BURN-Free off
    Performing OPC...
    Starting new track at sector: 0
    Track 01: 38 of 38 MB written (fifo 100%) [buf 100%] 8.5x.
    Track 01: Total bytes read/written: 39976960/39976960 (19520 sectors).
    Writing time: 39.613s
    Average write speed 7.4x.
    Min drive buffer fill was 100%
    Fixating...
    Fixating time: 30.935s
    cdrecord.mmap: fifo had 630 puts and 630 gets.
    cdrecord.mmap: fifo was 0 times empty and 557 times full, min fill was
    96%.

    Despite the warnings, the CD came out perfectly! 

    -- 
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
  • Next message: Russ Schneider: "Debian newbie confused over apt and packages"

    Relevant Pages
    Loading