Re: Mouse

• Previous message: David Clymer: "Re: Very strange: Cannot access any sites although connection apparently good"
• In reply to: Mark: "Mouse"
• Next in thread: Andreas Janssen: "Re: Mouse"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Date: Mon, 16 Feb 2004 10:52:56 -0600
To: debian-user@lists.debian.org

Mark wrote:

> Hi, I just managed to install Debian GNU/Linux 3.0r2 on a P-166
> with 48Mb and a 10GB HD. It took several tries since there are
> installation questions and terms that are not designed for a new user.
> I read the installation manual which helped a lot. I used the boot
> disks and driver disks with the base system file on a seperate HD.
> Debian is installed on a partition with a swap file on another. No
> DOS. I used Tasksel to get the "Desktop Environment" which would seem
> to be Gnome. The computer boots to the login part of Gnome. Login is
> successful :-)
> The problem is that my mouse doesn't work. It is attached to serial
> port (com) 1. During the installation I selected something like tty0?
> as the port, not knowing if it was correct. Obviously it was not. The
> web site mentions using xf86config to install a new mouse but doesn't
> say exactly how or where to use it. Eventually I plan to know this OS
> inside and out as I do Win98SE, 95, XP, Win3.11 and DOS. I have no
> clue how to fix my mouse with Debian except by starting all over again
> and hoping to get it right again.

There are quite a few variables in the equation, but the assumptions I
make about you and your setup will probably be accurate enough to
provide a quick fix.

Edit the file "/etc/X11/XF86Config-4" with your favorite text editor (I
like nano for things like this). You can do so by switching to a text
console with Ctrl-Alt-F2, then logging in, then running "nano
/etc/X11/XF86Config-4". Scroll down to the section dealing with the
mouse; you'll see some lines similar to:
 
        Option "Device" "/dev/ttyS0"
        Option "Protocol" "ImPS/2"

These two lines are what need to be tweaked. (The "xf86config" tool
(which is obsolete nowadays), and other tools like "dpkg-reconfigure
xserver-xfree86" (which is what you'd want to use instead) do this
tweaking that you're about to do by manually editing the file.)

/dev/ttyS0 corresponds to the DOS-speak of COM1
/dev/ttyS1 = COM2
/dev/ttyS2 = COM3
/dev/ttyS3 = COM4

The protocol line determines what "language" your mouse speaks. A good
one to try would probably be "ps2" or "ms". There are others; probably
the easiest way (for now) to get a list of possibilities is to google
for them.

Then restart your X session. Your session manager is probably gdm, so
the command "/etc/init.d/gdm restart" should restart X for you (be aware
that if you left anything running in X, it shut down without saving
files, etc). If your session manager is kdm instead of gdm, the command
would be "/etc/init.d/kdm restart". Same for xdm and wdm.

(Of course, you'll have to execute these commands as root. But learn not
to log in as root except when absolutely needed. Once you've learned a
bit, install sudo and use it instead.)

>
> P.S. I may have some suggestions in the near future to make the
> installation process easier for dummies. Mainly adding better help
> descriptions about what the system is asking for and talking about.
> This installation is far from self explanatory.
>
>
The next version of Debian has (from what I've heard) a better
installer. So you might want to hold off on your comments until you've
tried that version's installer.

-- 
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

• Previous message: David Clymer: "Re: Very strange: Cannot access any sites although connection apparently good"
• In reply to: Mark: "Mouse"
• Next in thread: Andreas Janssen: "Re: Mouse"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]