Re: authenticate via NTLM & AD

From: Pim Bliek | PingWings.nl (bliekp_at_pingwings.nl)
Date: 05/07/04

  • Next message: Colin Watson: "Re: lynx and google.com" 
    Date: Fri, 7 May 2004 11:35:04 +0200 (CEST)
To: "debian-user" <debian-user@lists.debian.org>

    You need to give clients access in the APS config! Maybe that helps?

    > Hi,
    >
    > i'm getting closer but it's still not working.
    > First, i've installed the Jana server but i couldn't
    > even use it from my windows machine.
    > I mean it worked but i wasn't able to establsh a connection
    > through it.
    > So i focused on APS again although the tests that i did before
    > i initially mailed the list didn't work.
    > Here are the steps that i did:
    >
    > 1. Install aps on windows, listen to port 3128.
    > 2. Surf from the same machine using windows aps on port 3128.
    > Result: WORKS
    > 3. Surf from the debian woody using windows aps on port 3128.
    > Result: FAILS
    > 4. Install aps on the debian machine, listen to port 3128.
    > 5. Surf from the windows machine using the debian machine aps proxy
    > Result: WORKS.
    > Now i'm sure the aps program works on Linux & Windows.
    > 6. Surf from the debian woody using the debian machine aps proxy.
    > Result: FAILS
    >
    > Somewhere there is a problem with the Linux.
    > This is what i've tried to get it to work:
    >
    > 1) Changing /etc/apt/apt-conf
    > Setting Acquire::http::Proxy "http://winpcname.domain.be:3128";
    > or if running aps on linux
    > Setting Acquire::http::Proxy "http://linuxpcname.domain.be:3128";
    > Pinging winpcname.domain.be and linuxpcname.domain.be works.
    > apt-get fails again. It seems to get the correct ip for the names
    > in the sources.list yet the connection times out.
    > When the connection hangs and i run netstat -na i can see this:
    > tcp 0 1 10.10.2.131:1630 204.152.189.120:80 SYN_SENT
    > 10.10.2.131 is the ip of the linuxserver (and this is taken when
    > i initiate an apt-get update from the linux server with aps also
    > running on the server)
    > When i look at the aps console there are no signs of any connection
    > attempt so it seems as if the proxy settings are ignored for http
    > attempts?
    >
    > 2) I tried setting http_proxy too but same result
    >
    > 3) Telnetting to winpcname.domain.be/linuxpcname.domain.be works.
    > For instance: telnet linuxpcname.domain.be 3128
    > Works or at least i can see on the console that APS registers a
    > connection.
    >
    > 4) To test further i've installed apache and a simple site on the
    > windows machine and tried to do a wget.
    > It worked, wget connected fine and downloaded the index.html.
    > I checked iptables -L but all default policies are set to ACCEPT.
    > I have no clue anymore as to what happens.
    >
    > What i can think off:
    > 1) Problem with the routing
    > My routing table on the linux looks like this:
    > 10.0.0.0 * 255.255.0.0 U 0 0 0 eth0
    > default 10.10.0.12 0.0.0.0 UG 0 0 0 eth0
    > where 10.10.0.12 is the default gateway of the network
    >
    > 2) apt-get doesn't take in account the http_proxy or proxy setting
    > in /etc/apt/apt-conf. But this seems highly unlikely.
    >
    > Anybody know what might be causing this?
    > Any other stuff i can check.
    >
    > Thanks,
    > Benedict
    >
    >
    >
    > --
    > To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
    > with a subject of "unsubscribe". Trouble? Contact
    > listmaster@lists.debian.org
    >
    > 

    -- 
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
  • Next message: Colin Watson: "Re: lynx and google.com"

    Relevant Pages