Re: Networking Problem

From: Matt Perry (matt_at_primefactor.com)
Date: 07/31/04

  • Next message: Matt Perry: "Re: dselect installing packages I didn't request" 
    Date: Sat, 31 Jul 2004 10:16:42 -0700 (PDT)
To: debian-user@lists.debian.org

    On Sun, 1 Aug 2004, Jonathan Barnes wrote:

    > I cant see anything wrong with my routing table either:
    > > Kernel IP routing table
    > > Destination Gateway Genmask Flags Metric Ref Use Iface
    > > 10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
    > > 10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
    > > 0.0.0.0 10.0.0.1 0.0.0.0 UG 0 0 0 eth0

    You have the same network configured on two interfaces. Are eth0 and eth1
    on the same NIC? Should eth1 have a destination of 10.1.1.0 instead? 

    -- 
Matt Perry | matt at primefactor dot com
-- 
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
  • Next message: Matt Perry: "Re: dselect installing packages I didn't request"

    Relevant Pages

    • Re: How to get my 2 ethernet cards to work
      ... interfaces file... ... '/etc/ifplugd/ifplugd.action eth1 up'. ... for eth0. ... please read it before requesting help. ...
      (comp.os.linux.networking)
    • Re: [SLE] Dell True Mobile 1300 on Inspiron 8500 w/SuSE 8.2
      ... First you need to turn off eth0, as I assume you will be using eth1 on the ... same subnet so 2 interfaces with similar IP numbers will confuse. ... and then change in the ifup config file to manual ... Now how is eth1 getting its IP ...
      (SuSE)
    • Configure 2 nics
      ... interfaces in Woody in order to do NAT between them. ... correctly installed and I want to use eth0 in DHCP and eth1 with static ip ... eth1), but not both at the same time. ... workaround is to use the command ifconfig ... ...
      (Debian-User)
    • Configure 2 nics
      ... interfaces in Woody in order to do NAT between them. ... correctly installed and I want to use eth0 in DHCP and eth1 with static ip ... eth1), but not both at the same time. ... workaround is to use the command ifconfig ... ...
      (Debian-User)
    • Odd networking problem.
      ... Only one of the interfaces can contact IP adresses outside of the local ... iface eth0 inet static ... iface eth1 inet static ... Ping from eth0 to local router works fine ...
      (comp.os.linux.misc)