Re: 100Mbit Lan runs at sloow 417Kbs!!

From: Zachary Rizer (zrizer_at_yahoo.com)
Date: 09/29/04

  • Next message: Grant: "Icewm and backgrounds ?"
    Date: Wed, 29 Sep 2004 10:08:57 -0700 (PDT)
    To: Adamo <im2sexy4you@gmail.com>, debian-user@lists.debian.org
    
    

    --- Adamo <im2sexy4you@gmail.com> wrote:

    > oh sorry. i tryed tranfering over samba and SCP same
    > slow speed. on
    > the windows machine i used normal windows networking
    > SMB protocol.
    > The transfer is between to local machines one
    > windows the other debian.
    >
    > On Wed, 29 Sep 2004 09:56:28 -0700 (PDT), Zachary
    > Rizer
    > <zrizer@yahoo.com> wrote:
    > >
    > >
    > > --- Adamo <im2sexy4you@gmail.com> wrote:
    > >
    > > > Hi i had windows on this box before and the
    > speed
    > > > was above 3000Kbs i
    > > > installed debian and now its a slow 417kbs.
    > > > im running sarge with kernel 2.6.8 on a 800Mhz
    > > > 512ram machine and
    > > > minimal amount of services, there is plenty of
    > cpu
    > > > left so thats not
    > > > the problem.
    > > > its a asus av7 motherboard and the netcard is a
    > > > Realtek Semiconductor
    > > > Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) card.
    > > > my switch is 100Mbits.
    > > > Ok got any ideas?
    > > > Im desperate!
    > > > heres som output
    > > >
    > > > Output fra mii-tool:
    > > > eth0: negotiated 100baseTx-FD, link ok
    > > > product info: vendor 00:00:00, model 0 rev 0
    > > > basic mode: autonegotiation enabled
    > > > basic status: autonegotiation complete, link ok
    > > > capabilities: 100baseTx-FD 100baseTx-HD
    > 10baseT-FD
    > > > 10baseT-HD
    > > > advertising: 100baseTx-FD 100baseTx-HD
    > 10baseT-FD
    > > > 10baseT-HD
    > > > link partner: 100baseTx-FD 100baseTx-HD
    > 10baseT-FD
    > > > 10baseT-HD flow-control
    > > >
    > > > output from ifconfig:
    > > > eth0 Link encap:Ethernet HWaddr
    > > > 00:C0:26:78:14:A1
    > > > inet addr:192.168.0.100
    > > > Bcast:192.168.0.255 Mask:255.255.255.0
    > > > UP BROADCAST RUNNING MULTICAST
    > MTU:1500
    > > > Metric:1
    > > > RX packets:599881 errors:0 dropped:0
    > > > overruns:0 frame:0
    > > > TX packets:795532 errors:0 dropped:0
    > > > overruns:0 carrier:0
    > > > collisions:0 txqueuelen:1000
    > > > RX bytes:173192384 (165.1 MiB) TX
    > > > bytes:842761893 (803.7 MiB)
    > > > Interrupt:3 Base address:0x7000
    > > >
    > > >
    > > > --
    > > > To UNSUBSCRIBE, email to
    > > > debian-user-REQUEST@lists.debian.org
    > > > with a subject of "unsubscribe". Trouble?
    > Contact
    > > > listmaster@lists.debian.org
    > > >
    > > >
    > >
    > > It runs slow when? When transferring files
    > between
    > > two local machines? Using what protocol, ftp,
    > http,
    > > smb, nfs, other? How are you measuring the
    > > throughput? How did you measure it when you ran
    > > windows? There are far more variables at play
    > here
    > > than you may think.
    > >
    > > ~Zaq
    > >
    >
    >
    > --
    > To UNSUBSCRIBE, email to
    > debian-user-REQUEST@lists.debian.org
    > with a subject of "unsubscribe". Trouble? Contact
    > listmaster@lists.debian.org
    >
    >

    1) Try not to top-post.
    2) "Hi i had windows on this box before and the speed
    was above 3000Kbs i installed debian and now its a
    slow 417kbs." Take your 30000Kbs, divide it by 8, you
    get 375KB/s. Hint: 8bits = 1byte. Debian is
    reporting the kiloBYTES per second (~417, as you
    reported), windows was reporting kiloBITS per second.

    -- 
    To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org 
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
    

  • Next message: Grant: "Icewm and backgrounds ?"

    Relevant Pages

    • Restricting Write Capabilities On CD-RW Drive
      ... I'd like to know if it's possible to override write capabilities, CD-RW ... (CD/DVD) ... Local machines run Windows XP and the server ...
      (microsoft.public.windows.group_policy)
    • Re: copy file over LAN
      ... local machines are on windows) and I want to copy it locally. ... import shutil ... How do I provide authentication to copy this file? ...
      (comp.lang.python)
    • Machines receiving gp but not applying
      ... Running gpresult shows the machines are getting group policy in a windows ... but for some reason they're not applying the settings to the ... local machines. ...
      (microsoft.public.windows.group_policy)
    • Re: Frequent Hourglass in Explorer
      ... I think this did start happening when I upgraded to SP2. ... frequently check Windows Update, etc., but haven't upgraded back to SP2 yet, ... >>Many times lately, when I try to do some function in Windows Explorer, ... > to what you are reporting. ...
      (microsoft.public.windowsxp.help_and_support)
    • Re: Frequent Hourglass in Explorer
      ... I think this did start happening when I upgraded to SP2. ... frequently check Windows Update, etc., but haven't upgraded back to SP2 yet, ... >>Many times lately, when I try to do some function in Windows Explorer, ... > to what you are reporting. ...
      (microsoft.public.windowsxp.general)