Re: 100Mbit Lan runs at sloow 417Kbs!!

From: Adamo (im2sexy4you_at_gmail.com)
Date: 09/29/04

  • Next message: Tim Kelley: "Re: Lost printing from OpenOffice; spadmin doesn't add printer"
    Date: Wed, 29 Sep 2004 20:31:14 +0200
    To: debian-user@lists.debian.org
    
    

    On Wed, 29 Sep 2004 13:04:21 -0500, Jacob S <stormspotter@6texans.net> wrote:
    > On Wed, 29 Sep 2004 13:56:40 -0400
    > Paul Tsai <paul@thirdaspect.net> wrote:
    >
    > > Zachary Rizer wrote:
    > >
    > > >--- Adamo <im2sexy4you@gmail.com> wrote:
    > > >
    > > >>oh sorry. i tryed tranfering over samba and SCP same
    >
    >
    > > >>slow speed. on
    > > >>the windows machine i used normal windows networking
    > > >>SMB protocol.
    > > >>The transfer is between to local machines one
    > > >>windows the other debian.
    > > >>
    > > >>On Wed, 29 Sep 2004 09:56:28 -0700 (PDT), Zachary
    > > >>Rizer
    > > >><zrizer@yahoo.com> wrote:
    > > >
    > > >1) Try not to top-post.
    > > >2) "Hi i had windows on this box before and the speed
    > > >was above 3000Kbs i installed debian and now its a
    > > >slow 417kbs." Take your 30000Kbs, divide it by 8, you
    > > >get 375KB/s. Hint: 8bits = 1byte. Debian is
    > > >reporting the kiloBYTES per second (~417, as you
    > > >reported), windows was reporting kiloBITS per second.
    > > >
    > > it looks like you are running your network half-duplexed though. Use
    > > full, you should get increases.
    >
    > Actually, re-read the output he posted from mii-tool, pasted below for
    > convenience. It indicates he is in fact running 100Mbps full duplex
    > already.
    >
    > >Output fra mii-tool:
    > >eth0: negotiated 100baseTx-FD, link ok
    > ^^^^^^^^^^^^^^^^^^^^^^^
    > > product info: vendor 00:00:00, model 0 rev 0
    > > basic mode: autonegotiation enabled
    > > basic status: autonegotiation complete, link ok
    > > capabilities: 100baseTx-FD 100baseTx-HD
    >
    > Jacob
    >
    >
    >
    >
    > --
    > To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
    > with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
    >
    >

    Yes im running full duplex. and my windows was not reporting bytes but
    Kilobytes.
    right now it takes over 60 minutes to transfer 700Mb thats just not
    normal, not in a home network!
    du you have any other ideas?

    -- 
    To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org 
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
    

  • Next message: Tim Kelley: "Re: Lost printing from OpenOffice; spadmin doesn't add printer"

    Relevant Pages

    • :SPAM: Re: 100Mbit Lan runs at sloow 417Kbs!!
      ... >convenience. ... It indicates he is in fact running 100Mbps full duplex ... I did see that full duplex line, however, if all he is doing is ... duplex network. ...
      (Debian-User)
    • Re: force full duplex
      ... > How can I make my system run with full duplex? ... here is snip of http://www.ovislink.com.tw/DRIVERS/8139/linux-help.htm ... Driver is designed with the goal that no options should be needed in ...
      (Debian-User)