Re: NOT ANSWERED asus a7n8x built in nic and intel pro 100 S nic

From: Jacob S (stormspotter_at_6Texans.net)
Date: 09/29/04

  • Next message: Andrea Vettorello: "Re: Firefox Install"
    Date: Wed, 29 Sep 2004 16:20:22 -0500
    To: debian-user@lists.debian.org
    
    

    On Wed, 29 Sep 2004 13:54:49 -0700
    Ian L <debhelp@merk.caltech.edu> wrote:

    > i have the asus a7n8x, with the built in NIC as well as a 2nd nic i
    > added, an intel pro 100 S, with chipset number 82550.
    >
    > I'm trying to use the netinst cd and its not working because it keeps
    > failing to set up my network cards. I tried installing it using both
    > the 2.4 kernel and the 2.6 kernel but both fail. The intel card just
    > fails to install. It says its installing for 82557 82558 and 82559
    > chips, so maybe thats the problem with the intel card. The built in
    > nforce nic though says it installs, but fails to get an ip from the
    > dhcp server. DHCP server is working. plugged my laptop into the same
    > port with the same cable and it picked it up right away.
    >
    > I found the below link searching the list archives. It says it needs
    > the forcedeth module, but when the installer is running, one of the
    > modules it says it needs but thats not available is the forcedeth
    > module.
    >
    > http://lists.debian.org/debian-user/2004/07/msg01368.html
    >
    > I also tried doing the full install cd, and then upgrading the kernel.
    > But thats turning into a nightmare since it wants me to install a
    > million other packages that it depends on.

    You don't mention which netinst cd you're using. Is it rc1 or a daily
    build or something else? If you're using rc1, you can probably solve
    your problem by using one of the latest daily builds - worked great for
    me recently installing on a DFI motherboard with a builtin Nforce NIC.

    If you're already using a recent daily build and having these problems,
    it sounds like you need to escape to a console- Ctrl-F2 and run
    ifconfig and lsmod to see which of your ethernet cards it's recognizing
    and trying to setup. If you're not sure what to do here, send us the
    output from 'ifconfig', 'ifconfig -a' and 'lsmod' and we'll try to give
    you more specific instructions.

    If it really does have one of your NICs setup, but it's just a matter of
    not finding the dhcp server, is there a reason you can't assign it an ip
    manually?

    HTH,
    Jacob

    -- 
    To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org 
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
    

  • Next message: Andrea Vettorello: "Re: Firefox Install"

    Relevant Pages

    • Re: NOT ANSWERED asus a7n8x built in nic and intel pro 100 S nic
      ... DHCP server is working. ... >You don't mention which netinst cd you're using. ... >me recently installing on a DFI motherboard with a builtin Nforce NIC. ... boot process fails. ...
      (Debian-User)
    • Re: tv tuners not found
      ... what video card and video card drivers are you using? ... cards are recognized and drivers are installed. ... MCE lets me configure the ... (all ms updates prior to installing cards) ...
      (microsoft.public.windows.mediacenter)
    • Re: Setting up a PXE Boot Server on Solaris 8
      ... 1x SUN SPARC Workstation with Solaris 8 ... Installing Windows 2000 Professional on the PC over network!!! ... CD)on my DHCP Server, but it failed. ... > | ich suche Informationsquellen zur Einrichtung von PXE Boot unter Solaris ...
      (comp.unix.admin)
    • Re: MCE 2005, PVR250MCE and a PVR150MCE, Dual tuner ?
      ... The tuner cards should be fine. ... Microsoft Student Ambassador - University of Tennessee at Chattanooga ... > MCE installed with this hardware.. ... > Installing cards, installing drivers, then running the MCE wizard? ...
      (microsoft.public.windows.mediacenter)
    • Re: Approved Components for XP Media Centre
      ... using ATI media center to record in DivX while I'm in town, ... I wonder if installing MMC 9.08 has anything to do with Windows MCE ... recognizing my cards so easily??? ...
      (microsoft.public.windows.mediacenter)