Re: network connection fails after setup

From: Roger Creasy (roger_creasy_at_yahoo.com)
Date: 12/31/04

  • Next message: Bruce Smith: "Help with install" 
    Date: Thu, 30 Dec 2004 18:32:45 -0800 (PST)
To: debian-user@lists.debian.org

    > On Thu, 30 Dec 2004 03:34:53 -0800 (PST), Roger
    > Creasy
    > <roger_creasy@yahoo.com> wrote:
    > > Howdy!
    > >
    > > I set up sarge with kernel 2.4.
    > > This setup was done via a startup cd and http.
    > During
    > > setup files were downloaded with no problem. After
    > the
    > > setup was complete, I have no internet or network
    > > connection. Any suggestions for a fix?
    >
    > Is your network cable plugged in? The simplest
    > solution is often the
    > best.

    Yes it is plugged in and yes you correct regarding
    simple solutions.

    >Anyway we'll need some more info, give us the
    > output of lsmod
    > (to see if your network driver is loaded), ifconfig
    > -a, the contents
    > of /etc/network/interfaces and whatever you get if
    > you run "dmesg |
    > grep eth".
    >
    > Usually it's best to supply as much information as
    > you can think of
    > since we're going to be asking for it anyway.

    To send this requested info, since I don't have a
    network connection, I will have to write it down then
    type it into another computer then e-mail it. This
    will leave lots of room for me to make a mistake and
    give improper info. Can you simplify this process by
    telling me what I should look for? If not, I will
    gather the info and re-post...

                    
    __________________________________
    Do you Yahoo!?
    Yahoo! Mail - Easier than ever with enhanced search. Learn more.
    http://info.mail.yahoo.com/mail_250 

    -- 
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
  • Next message: Bruce Smith: "Help with install"

    Relevant Pages

    • RE: Securing a Local Network
      ... Show the Management of your company the insecurity of the Peer to Peer ... setup and discuss what risks are they willing to accept. ... -Cost of getting the web server and the mail server internally versus having ... -Use an older box for Intrusion Detection on the internal network as well. ...
      (Security-Basics)
    • Re: Client computer wont connect to internet ATTN: Joe Crown
      ... for my host/client setup. ... >When I supported Windows 98 & Windows ME the most common cause of ... >> When I try to connect to the internet using Firefox or Internet ... >> 7) In the Manufacturers box, click Microsoft, in the Network Protocols ...
      (microsoft.public.windowsxp.network_web)
    • Re: Network Connections x 2 PCs
      ... The setup is quite ... >>> If you have a broadband router, run XP's Network Setup Wizard on both ... tell it that the computers connect to the ... >>> If you have a hub, the setup depends on how many IP addresses you get ...
      (microsoft.public.windowsxp.general)
    • RE: Site-to-Site VPN not working
      ... I was looking through my documentation on this setup. ... In ISA on the remote server, add a site-to-site VPN using the name of the ... add a Network Rule called REMOTEOFFICE to route ...
      (microsoft.public.isa)
    • Re: Need help setting up a wireless network btwn 2 computers via router
      ... In fact, insult away as long ... instructions on how to set up this network. ... One is "Network Setup Wizard" and the other is ... "Wireless Network Setup Wizard," will either of these two walk me ...
      (microsoft.public.windowsxp.network_web)