Re: 2problems; kernel & net, apt-get err

From: Colin J. Ingram (cjingram_at_wisc.edu)
Date: 01/28/05

  • Next message: Hamster: "saving a video from a webcam"
    Date: Fri, 28 Jan 2005 14:02:29 -0600
    To: debian-user@lists.debian.org
    
    

    Im not sure about most of this but have you tried

    dpkg-reconfigure etherconf

    to get your network working. This has worked for me in the past.

    Colin

    ----- Original Message -----
    From: Es'uomikim <es_uomikim@op.pl>
    Date: Friday, January 28, 2005 3:54 am
    Subject: 2problems; kernel & net, apt-get err

    > Hi,
    >
    > I have two problems that I didn't get help anywhere....could you
    > help me ?
    >
    >
    > First problem is:
    >
    > /debian:~# apt-get -f install
    > Reading Package Lists... Done
    > Building Dependency Tree... Done
    > The following packages will be REMOVED:
    > mozilla-thunderbird-locale-pl
    > 0 packages upgraded, 0 newly installed, 1 to remove and 1 not
    > upgraded.1 packages not fully installed or removed.
    > Need to get 0B of archives. After unpacking 848kB will be freed.
    > Do you want to continue? [Y/n] Y
    > (Odczytywanie bazy danych ... 30958 plików i katalogów obecnie
    > zainstalowanych.)Usuwanie mozilla-thunderbird-locale-pl ... < ----
    > removeing thunderbirs
    > /var/lib/dpkg/info/mozilla-thunderbird-locale-pl.postrm: update-
    > mozilla-thunderbird-chrome: command not found
    > dpkg: b??d przetwarzania mozilla-thunderbird-locale-pl (--remove):
    > podproces post-removal script zwróci? kod b??du 127 < ----- post-
    > removal error code 127
    > Wyst?pi?y b??dy podczas przetwarzania: < --------------- there
    > were errors while processing
    > mozilla-thunderbird-locale-pl
    > E: Sub-process /usr/bin/dpkg returned an error code (1)
    >
    > /
    > Thunderbird is not instaled, few libs also aren't; I cannot remove
    > this package (even with attrib --force-yes); I cannot upgrade it or
    > do aything to make it work and anything to make work apt-get....how
    > to remove it and make apt-get work ...?
    >
    >
    >
    >
    >
    > second problem is:
    >
    > I want to upgrade my kernel but after installing new one it doesn't
    > connect to internet... Whan I installed debian it made everything
    > automaticly.While configurateing nwe kernel I checked 'Y' on my
    > Realtec RTL-8139 card; everything else was set like Xconfig
    > suggested me "If you don't know mark..."
    > I have pc connected to /SMC 7004 VBR Barricade/ that is my router...
    >
    > the hardware is the same as /lspci/ said../
    > 00:0a.0 Ethernet Controller: Realtec Semiconductor Co., Ltd. RTL-
    > 8139 (rev 10/)
    >
    > for:
    > /modprobe modprobe 8139too
    > > Can't locate module 8139too
    > /(on new kernel)/
    >
    >
    > /in Xconfig there are 3 options for realtec card; I marked them
    > like the Xconfig suggested: /N,Y,Y/ - I tryed also /Y,Y,Y/ --- no
    > results
    >
    > and/ /after:/ make oldconfig/ - I got /kernel panic/...
    > /...
    > kmod: failed to exec /slib/modprobe -s -h block-major-22 errno = 2
    > VFS: Cannot find root device "1603" or 16:03
    > please append "root=" boot option
    > Kernel Panic: VFS: Unable to mount root fs on 16:03
    >
    > ,
    >
    > lspci
    >
    > /and
    >
    > /cat
    >
    > /give me the same results on new and old kernel,
    > but:
    >
    > /ifconfig
    >
    > /say's something else on old one and new one.../
    > /
    >
    >
    > greetz,
    > T
    >
    >
    >
    >
    > --
    > To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
    > with a subject of "unsubscribe". Trouble? Contact
    > listmaster@lists.debian.org
    >


  • Next message: Hamster: "saving a video from a webcam"

    Relevant Pages

    • Re: 2.6 kernel upgrade gives garbled video (w/o X11)
      ... the Etch packages because of a dependency loop involving libc6. ... not passing any special kernel parameters on boot to the 2.4 kernel ... update and then try installing the 2.6 kernel package again? ...
      (Debian-User)
    • Re: 2.6 kernel upgrade gives garbled video (w/o X11)
      ... the Etch packages because of a dependency loop involving libc6. ... not passing any special kernel parameters on boot to the 2.4 kernel ... I was getting this error when trying to upgrade the ... update and then try installing the 2.6 kernel package again? ...
      (Debian-User)
    • RE: kernel update/wireless install
      ... Subject: kernel update/wireless install ... I have found the packages for both ... If you're installing on the 2.6.6.1-435.2.3 you need the following rpms: ... To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list -- ...
      (Fedora)
    • Re: Package installing / Kernel Upgrade
      ... My firewall machine seems to do okay with APT and installing packages; ... > the only way to upgrade the kernel to recompile a new one with the ...
      (Debian-User)
    • unsubscribe
      ... > Subject: debian newbie... ... If I need to recompile the kernel, ... Also, what other additional packages, ... >> The package you're trying to install presumably ...
      (Debian-User)