Re: copy dvd

From: Ernst-Magne Vindal (ernst_at_vindal.com)
Date: 01/30/05

  • Next message: George Alexandru Dragoi: "problem with openssh after i upgraded from sarge to sid."
    Date: Sun, 30 Jan 2005 13:17:17 +0100 (CET)
    To: Debian-User <debian-user@lists.debian.org>
    
    

    On Sun, 30 Jan 2005, Ron Johnson wrote:

    Well, tryed this, did not work, here's the outpt:

    $ dd bs=2048 if=/dev/scd0 | cdrecord -v dev=0,1,0 -
    Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
    TOC Type: 1 = CD-ROM
    scsidev: '0,1,0'
    scsibus: 0 target: 1 lun: 0
    Linux sg driver version: 3.1.22
    Using libscg version 'schily-0.5'
    atapi: 1
    Device type : Removable CD-ROM
    Version : 0
    Response Format: 2
    Capabilities :
    Vendor_info : '_NEC '
    Identifikation : 'DVD_RW ND-3500AG'
    Revision : '2.16'
    Device seems to be: Generic mmc2 DVD.
    Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
    Driver flags : SWABAUDIO
    Drive buf size : 1769472 = 1728 KB
    FIFO size : 4194304 = 4096 KB
    Track 01: data unknown length
    Total size: 0 MB (00:00.00) = 0 sectors
    Lout start: 0 MB (00:02/00) = 0 sectors
    Current Secsize: 2048
      ATIP start of lead in: -150 (00:00/00)
      ATIP start of lead out: 157789 (35:05/64)
    Disk type: unknown
    Manuf. index: -1
    Manufacturer: unknown (not in table)
    cdrecord: WARNING: Track size unknown. Data may not fit on disk.
    Starting to write CD/DVD at speed 8 in write mode for single session.
    Last chance to quit, starting real write in 0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    Performing OPC...
    Starting new track at sector: 0
    Track 01: 4 MB written (fifo 71%).dd: reading `/dev/scd0': Input/output
    error
    4322+0 records in
    4322+0 records out
    Track 01: 8 MB written (fifo 100%).
    Track 01: Total bytes read/written: 8851456/8851456 (4322 sectors).
    Writing time: 21.183s
    Fixating...
    cdrecord: Input/output error. close track/session: scsi sendcmd: no error
    CDB: 5B 00 02 00 00 00 00 00 00 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 03 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x72 Qual 0x03 (session fixation error - incomplete track in
    session) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.000s timeout 480s
    cmd finished after 0.000s timeout 480s
    Fixating time: 0.002s
    cdrecord: fifo had 141 puts and 141 gets.
    cdrecord: fifo was 0 times empty and 3 times full, min fill was 34%.

    and trying to look at the dvd to see gave this:

    $ mount /cdw
    mount: wrong fs type, bad option, bad superblock on /dev/scd1,
           or too many mounted file systems

    the empty dvd is not empty and not readable...:)

    any other suggestions?

    > On Sun, 2005-01-30 at 10:12 +0100, Ernst-Magne Vindal wrote:
    > > Hi, im running debian sarge, I have installed and configured a dvd reader
    > > and writer and emulating scsi, useing cdrecord to record ordinary data
    > > disks. This is working fine.
    > > But is there a simple way to clone dvd from dvd disks to dvd-+R?
    >
    > You have 2 DVD drives? /dev/hdb and /dev/hdd, for example?
    >
    > Using a pipe should work. Something like:
    > $ dd bs=2048 if=$SRCDRV | cdrecord -v dev=x,y,z -
    >
    > (Don't trust me on the bs, though.)
    >
    > > Still useing Pine, best IMAP client ever..
    >
    > s/useing/using/
    >
    > --
    > -----------------------------------------------------------------
    > Ron Johnson, Jr.
    > Jefferson, LA USA
    > PGP Key ID 8834C06B I prefer encrypted mail.
    >
    > I wish the USA could get out of the UN. But a forum where
    > governments can talk is too useful. The next best thing is to
    > only pay a fraction of our dues. Or find a better forum.
    >
    >
    >

    /ernst-magne

    Still using Pine, best IMAP client ever..


  • Next message: George Alexandru Dragoi: "problem with openssh after i upgraded from sarge to sid."

    Relevant Pages

    • Re: Fail to burn DVDs [NOT resolved after all]
      ... > How can I burn a DVD under FC2? ... > Here is some feedback I get from cdrecord. ... > CD-ROM ... it is on the FC2 ...
      (Fedora)
    • SUMMARY: DVD Burning On SunBlade 1000 or 2000s, Solaris 8 (or 9)
      ... I've attached a Perl script ... one simple command (pipes mkisofs | prodvd) and does logging ... When we purchase a BLADE 2000 we no longer purchase the $400 DVD rom ... You must compile cdrecord or you can try and use the one at ...
      (SunManagers)
    • [SLE] resmgr + cdrecord
      ... TOC Type: 1 = CD-ROM ... cdrecord: Resource temporarily unavailable. ... I suspect resmgr is at fault, but I cannot figure out exactly how. ... the exclude rules must come first, ...
      (SuSE)
    • SUMMARY: Suggestions for IDE DVD Writer on SPARC/Solaris
      ... Any experiences running the new multiformat DVD IDE writers such as the ... Plextor on either Ultra 5/10 or Blade 100/150? ... We use this with cdrecord and ProDVD, ... DVD +RW disk, cdrecord does not fully support this format yet. ...
      (SunManagers)
    • cdrecord problems
      ... Device type: Removable CD-ROM ... Disk sub type: Medium Type A, ... Performing OPC... ... cdrecord: Input/output error. ...
      (freebsd-questions)