Re: --SOLVED--Network problem Help!!

From: Sergio Basurto Juarez (sbasurtoj_at_yahoo.com)
Date: 03/09/05

  • Next message: cedric: "Sound problem with Sarge (2.6.7) on IBM IntelliStation"
    Date: Wed, 9 Mar 2005 14:08:04 -0800 (PST)
    To: debian-user@lists.debian.org
    
    

    --- Pedro Pozuelo <aerislives@gmail.com> wrote:
    > On Tue, 8 Mar 2005 18:54:13 -0800 (PST), Sergio
    > Basurto Juarez
    > <sbasurtoj@yahoo.com> wrote:
    > > Good Evening,
    > >
    > > I am trying to configure a server like the
    > following
    > >
    > > router eth0 eth1 LAN
    > > 192.1.0.13 192.1.0.14 192.1.0.23
    > > 192.1.0.0/24
    > >
    > > My default gw must be 192.1.0.13 the problem is
    > when I
    > > want to do any comunication with my LAN I have
    > > problems becase it tryies to goes out from eth0
    > some
    > > one knows how to achieve this, I was reading
    > > Adv-routing howto but I wondering if there is
    > another
    > > way to do it?. I think the communication must be
    > > transparent why it does not happen?.
    > >
    > > Any point to documentation or tip will be
    > appreciated
    > > a lot.
    > >
    > > Regards
    > >
    > > --
    > > Sergio Basurto J.
    > >
    > > If I have seen further it is by standing on the
    > > shoulders of giants. (Isaac Newton)
    > > --
    > >
    > > __________________________________
    > > Celebrate Yahoo!'s 10th Birthday!
    > > Yahoo! Netrospective: 100 Moments of the Web
    > > http://birthday.yahoo.com/netrospective/
    > >
    > > --
    > > To UNSUBSCRIBE, email to
    > debian-user-REQUEST@lists.debian.org
    > > with a subject of "unsubscribe". Trouble? Contact
    > listmaster@lists.debian.org
    > >
    > >
    > Hi,
    > What you need is a bridge.Although if you can, is
    > better to use
    > differents subnets for the LAN and server and use
    > the server as
    > gateway.
    >
    > You can start with this links if you need the
    > bridge:
    >
    >
    http://www.tldp.org/HOWTO/Ethernet-Bridge-netfilter-HOWTO.html
    > http://small.dropbear.id.au/docs/adslfirewall.html
    >
    > You can ignore the part of patch the kernel,
    > ebtables and firewall if
    > you only want to route the traffic.
    >
    > Good luck!
    >
    Thanks a lot my friend it works fine, I really
    appreciate your help.

    I configure the bridge like the instructions on the
    documents that you send, and it works.

    Kind Regards.

    -- 
    Sergio Basurto J.
    If I have seen further it is by standing on the 
    shoulders of giants. (Isaac Newton)
    --
    	
    		
    __________________________________ 
    Celebrate Yahoo!'s 10th Birthday! 
    Yahoo! Netrospective: 100 Moments of the Web 
    http://birthday.yahoo.com/netrospective/
    -- 
    To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org 
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
    

  • Next message: cedric: "Sound problem with Sarge (2.6.7) on IBM IntelliStation"

    Relevant Pages

    • Network "freeze/lost"
      ... I have a big trouble with several server, ... Subsystem: Compaq Computer Corporation: Unknown device 3200 ... Latency: 0, Cache Line Size: 0x10 ... I/O behind bridge: 0000f000-00000fff ...
      (Linux-Kernel)
    • [POSSIBLE BUG]: tg3 network is "lost"
      ... I have a big trouble with several server, ... Latency: 0, Cache Line Size: 0x10 ... I/O behind bridge: 0000f000-00000fff ... Capabilities: ...
      (Linux-Kernel)
    • Problem with OpenVPN and ethernet bridging
      ... I'm trying to get my feet wet with an ethernet bridging setup ... NIC of the dl360 server. ... I am not assigning IPs to the server's tap and bridge interfaces, ... I am creating the tap and bridge interfaces manually. ...
      (freebsd-questions)
    • Re: Best Config for LAN
      ... You just give the server the same gateway as the other machines. ... XP wireless NIC at .0.2, ... Bridged the XP wireless and wired NIC's, ...
      (microsoft.public.windows.server.networking)
    • Re: cannot load color "black"
      ... Thx for your experience. ... I have installed openoffice recently, ... I am using a NCD X-Terminal on a local lan as my terminal server, ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ...
      (Debian-User)