Problem moving to 2.6.12

From: David Goodenough (david.goodenough_at_btconnect.com)
Date: 09/28/05

  • Next message: Alf: "Downgrading a system to a particular distribution"
    To: debian-user@lists.debian.org
    Date: Wed, 28 Sep 2005 10:27:24 +0100
    
    

    I have an elderly machine which I use as a sacrificial machine and update
    every morning to the latest unstable. That way I know when it is sensible
    to update other machines.

    But I have a problem updating it to 2.6.12. It has been running 2.6.11 for
    a while, quite happily. But I wanted to move to 2.6.12 so I installed the new
    kernel package and tried to boot it.

    I can not see the early messages (there were some and what I saw of them
    as they wizzed past on the screen looked OK), but it ends up complaining
    that modprobe could not find /lib/modules/2.6.12-1-396/modules.dep which
    is a file that I know exists and looks correct (its not zero length or the
    like). Then it says "pivot_root: No such file or directory" and at /sbin/init
    432: cannot open dev/console: No such file.

    The disk it is booting (the same one as for 2.6.11) is a SCSI device, /dev/sdb
    and it is driven by an Adaptec AHA-2940. So I suppose it is possible that
    support for this device has not been built into the kernel or that it has
    not been included in the initrd. The other thing about this machine is that
    it is an MCA machine. Now the MCA stuff on this machine has not worked
    for a long time (linux does not seem able to get the card IDs) but there are
    no MCA cards installed, they are all PCI, including the Adaptec card.

    Given that it does not seem able to find the hard drive of course none
    of the console has been written to disk. I suppose I might be able to
    persuade it to write to a serial port and record it using minicom.

    Any ideas as to how to debug this?

    David

    -- 
    To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org 
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
    

  • Next message: Alf: "Downgrading a system to a particular distribution"

    Relevant Pages

    • RE: SCSI Tape Drive - LUN Support
      ... Adaptec card or on some other adapter? ... the Adaptec card is 1 DLT VS160 Drive. ... When I do a lsmod from the command line, ...
      (RedHat)
    • Installing an Ethernet card on a IBM PS/2 77 486DX2
      ... Two of the MCA slots have a card in them: ... Slot 1 XGA-2 Video Adapter ... I install the MCA Ethernet card and boot the machine. ...
      (comp.sys.ibm.ps2.hardware)
    • Re: Auction: PocketPOST MCA
      ... It is a full-blooded MCA POST card, ... The port atop is for plugging the ISA port card with LED-readout into it ...
      (comp.sys.ibm.ps2.hardware)
    • Re: Drive configuration options with RAID (7 harddrives)
      ... > I don't have the:SI card yet. ... > I am using a 19160 adaptec card. ... That only has a single SCSI channel and is not real HW RAID. ... allows the SE CD not to force the whole bus to SE mode. ...
      (comp.periphs.scsi)
    • Re: Recommendation for USB 2.0 PCI card for PowerEdge 2600?
      ... I've only installed one SBS server and it was on a Dell 2600 last summer. ... was totally shocked to realize the server didn't have USB 2.0 built in. ... Spent $80+tax for the card thinking it was cheaper to pay upfront ... we ended up returning the Adaptec card and buying the cheapest ...
      (microsoft.public.windows.server.sbs)