Re: ide: failed opcode was: unknown

From: Alexandru Cardaniuc (kodea_at_mail.ru)
Date: 11/03/05

  • Next message: Croy, Nathan: "RE: Shutdown due to thermal event (sid)" 
    To: debian-user@lists.debian.org
Date: 03 Nov 2005 07:29:52 -0800

    James Vahn <jvahn@short.circuit.com> writes:

    > Alexandru Cardaniuc wrote:
    > > Enabled Supported: * NOP cmd * READ BUFFER cmd * WRITE BUFFER
    > >cmd * Host Protected Area feature set * Look-ahead Write cache *
    > >Power Management feature set Security Mode feature set SMART feature
    > >set
    > ^^^^^^^^^^^^^^^^^ Disabled. Turn SMART on in your
    > BIOS and run the selftest via smartctl.
     
    I installed smartmontools, set in /etc/default/smartmontools

    enable_smart="/dev/hda"

    start_smartd=yes

    I will try now to run 2 tests:

    # smartctl -C -t short /dev/hda

    # smartctl -C -t long /dev/hda

    and later on will send the results.

    But right now I already checked # smartctl -a /dev/hda

    I attach smartctl.txt with the output.

    >From the output it seems like it's failing. Why the tests that I ran
    earlier today in the BIOS were successful and didn't indicate any
    problem?

    Then what is the final verdict? Throw the hard drive away? 

    -- 
"But what has been said once can always be repeated."  
- Zeno of Elea
-- 
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
  • Next message: Croy, Nathan: "RE: Shutdown due to thermal event (sid)"