Re: about ethernet card

Nevruz Mesut Sahin wrote:

I wrote terminal

ifconfig to terminal and it is written

Link Encap:Ethernet HWaddr 00:AF:90:20:F0:6C
inet addr: 12.13.14.15 Bcast: x.x.x.y Mask 255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:826648 errors:0 dropped:0
overruns:0 frame:0
TX packets:989379 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:99472449 (94.8 Mb) TX
bytes:861159294 (821.2 Mb)
Interrupt:9 Base address:0xf000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:7510 errors:0 dropped:0
overruns:0 frame:0
TX packets:7510 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4298907 (4.0 Mb) TX bytes:4298907
(4.0 Mb)



but the seller told me there is 2 ethernet cards on
the machine but I cant see the other. how can I see
all ethernet card. If you know please help.

Try the command "lspci" to list all hardware in your computer (on the
terminal, just like "ifconfig"). Post this output here. Also send the
output of "uname -a" and "cat /etc/issue"; we need this information to
give you better advice.

Regards,
Florian


--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx

Relevant Pages

  • Re: Slow slow slow.
    ... This is what those commands output. ... UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ...
    (Ubuntu)
  • Re: Still cant ping my Linux box
    ... [root@Python root]# route -n ... # ifconfig ... UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ... UP LOOPBACK RUNNING MTU:16436 Metric:1 ...
    (comp.os.linux.networking)
  • Re: CEPTCL: Doesnt RX multicast, has anyone seen it work before?
    ... and does ifconfig for the used interface ... UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ... I need the options that ceptcl has though. ... works on one interface and ceptcl can utilize any interface (or ...
    (comp.lang.tcl)
  • Re: How to get my 2 ethernet cards to work
    ... here's my ifconfig and netstat -rn My other PC is ... UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ... inet addr:192.168.1.10 Bcast:192.168.1.255 ...
    (comp.os.linux.networking)
  • Re: Stuck with ADSL speed problem
    ... Before you go buying anything, take a look at the error counts in the output of ifconfig. ... UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ... Even at the 1st ifconfig I issued, there are 4 errors when the only things done was talking to the DHCP to get a dynamic IP address. ... broadcast: 1.244.135.255 on eth0". ...
    (comp.os.linux.networking)