Bridge problem

Hey guys,

I set up a bridge with ethernet interface, it worked well, the packets
passed through the bridge, but i don't know why i can't connect
directly to the bridge.

For example, i set up the br0 interface 192.168.1.1, when i go in
another machine and try for example connect in bridge's machine ssh it
just doesn't work.

Someone have any ideia?!

Thanks for the attention,
[]s

--
------------------------------
Leonardo Marques
www.analyx.org
------------------------------


--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx

Relevant Pages

  • Re: Ethernet > WiFi adaptor with WPA?
    ... On Sun, 15 Oct 2006 22:08:43 GMT, John Navas ... ethernet interface is .. ... A doubt the bridge is terribly fussy. ...
    (alt.internet.wireless)
  • Re: Bridge problem
    ... Leonardo Marques wrote: Hey guys, ... I set up a bridge with ethernet interface, it worked well, the packets ... Everyone is raving about the all-new Yahoo! ...
    (Debian-User)
  • Re: Radius assigned Vlans on Cisco AP1200
    ... ~ than one Ethernet interface in the same group mean that I might get some ... VLAN, and then put them in the same bridge-group, then the AP will ... bridge those two VLANs together. ... (Note that I've set Followup-to: ...
    (alt.internet.wireless)
  • Re: Bridge problem
    ... Leonardo Marques wrote: ... I set up a bridge with ethernet interface, it worked well, the packets ...
    (Debian-User)
  • Re: wlan0 eth0 bridging problem
    ... I have two NICs on my laptop: eth0 and wlan0, I tried to bridge them ... and use a ad-hoc connection with my cellphone to share the internet ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx with a subject of "unsubscribe". ...
    (Debian-User)