Re: Question about PCI IDs and Drivers

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Eduardo wrote:
I have a new Network Card, and I found the VENDOR ID and the DEVICE ID.
I found it in "lspci -nv" and later looking for the given number in
/var/libs/pciutils/pci.ids, but now, how do I know which driver to
use? And if Debian has it compiled?

The card is (listed with pci.ids) :

1904 Hangzhou Silan Microelectronics Co., Ltd.
8139 RTL8139D [Realtek] PCI 10/100BaseTX ethernet adaptor

Now, the output of lspci -v :

0000:00:0b.0 Ethernet controller: Hangzhou Silan Microelectronics Co.,
Ltd. RTL8139D [Realtek] PCI 10/100BaseTX ethernet adaptor (rev 01)
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at cfff7f00 (32-bit, non-prefetchable) [size=256]
I/O ports at d000 [size=256]
Expansion ROM at cffa0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Vital Product Data


I think is the Driver 8139too, but when I modprobe it, my Network
Cards still doesnt work.

If I do "ifconfig eth1 10.0.0.221 255.255.255.0 up" it says No Such Device.

8139too would also be my guess.

What's in your /etc/network/interfaces file?

- --
Ron Johnson, Jr.
Jefferson LA USA

Is "common sense" really valid?
For example, it is "common sense" to white-power racists that
whites are superior to blacks, and that those with brown skins
are mud people.
However, that "common sense" is obviously wrong.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFEvnaSS9HxQb37XmcRAjkHAJ4lz2qbVQgd6ZG6q66AiO44FJ+sCQCePIIw
dTXrd+tBdVdRHFnLJgjOPgU=
=s71E
-----END PGP SIGNATURE-----


--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx
with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx

Relevant Pages

  • Re: Question about PCI IDs and Drivers
    ... The card is: ... the output of lspci -v: ... There is also 8139cp which according to the comments in the source file ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ...
    (Debian-User)
  • Re: X-Config...
    ... It should identify the card and propose to use the "nv" driver. ... goes wrong you can use lspci to find out the bus address. ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ...
    (Debian-User)
  • Question about PCI IDs and Drivers
    ... I have a new Network Card, and I found the VENDOR ID and the DEVICE ID. ... the output of lspci -v: ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx with a subject of "unsubscribe". ...
    (Debian-User)
  • Re: 3c59x problem with 2.4.6-test[34]
    ... A full lspci on the card gives: ... Tom Rini ... To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ ...
    (Linux-Kernel)
  • RE: [linux-audio-user] snd-hdsp+cardbus=distortion -- the sagacontinues (cardbus driver=culprit?) MO
    ... I've tinkered even further with the stuff and I do have my lspci and other ... I've tried now runnning card with the ... external Word Clock -- the results are the same (distortion persists). ... Apparently sound has gaps that are comparable in size to the sound data ...
    (Linux-Kernel)