Re: Memory card reader on Etch

Qua, 2006-08-16 às 11:13 -0700, Jeff D escreveu:

Mirto Silvio Busico wrote:
Sorry. Not posted to the list.

Ron Johnson wrote:

Mirto Silvio Busico wrote:

Hi all,

where can I find information on using an integrated memory card reader?

I have a Toshiba laptop with an integrated memory card reader.
I'm using Etch

It should "just work". Are you having any specific problems?



Probably I'm not able to see the memory card mounted.
When I insert the memory card, I didn't see it not in mount, nor appears
an icon (as it does for usb pen drive)..
If I look at PCI elements I see:
...
msb01:~# lspci
00:00.0 Host bridge: ATI Technologies Inc RS300 Host Bridge (rev 02)
00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge
00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 (rev 01)
00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2 (rev 01)
00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller (rev 01)
00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 1a)
00:14.1 IDE interface: ATI Technologies Inc ATI Dual Channel Bus Master
PCI IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc Unknown device 434c
00:14.4 PCI bridge: ATI Technologies Inc Unknown device 4342
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97
Audio Controller (rev 01)
00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01)
01:05.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility
Radeon 9600 M10]
02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212
802.11abg NIC (rev 01)
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
02:04.0 CardBus bridge: ENE Technology Inc CB-710/2/4 Cardbus Controller
02:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card
Reader Controller
02:04.2 Class 0805: ENE Technology Inc ENE PCI Secure Digital Card
Reader Controller
02:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc:
msb01:~#
...

The last four lines seems to indicate that the card reader is working.

Mybe I'm doing something wrong.

Mirto


whats the dmesg output after you put the memory card in? You might be
able to find out what device its getting assigned to.



In the Debian Portuguese Discussion list I had asked for help, and one
guy says that the support to embedded card readers, for the ENE
Technology exists in the Kernel 2.6.17.

--
Sincerely
José Oleiro aka Matafome (#computers at irc.ptnet.org Blog do Matafome )
Running Ubuntu 6.06 Dapper with XGL on Fujitsu-Siemens Model Amilo M
1420

Attachment: signature.asc
Description: Esta =?ISO-8859-1?Q?=E9?= uma parte de mensagem assinada digitalmente

Relevant Pages

  • Re: Memory card reader on Etch
    ... I have a Toshiba laptop with an integrated memory card reader. ... 00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller ...
    (Debian-User)
  • Re: Memory card reader on Etch
    ... I have a Toshiba laptop with an integrated memory card reader. ... 00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller ...
    (Debian-User)
  • Re: Memory card reader on Etch
    ... I have a Toshiba laptop with an integrated memory card reader. ... 00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller ...
    (Debian-User)
  • Re: Tablets? - OT
    ... It then went on a Telxon 1140 in 1996, which used the same chip set, ... The major problem I've always faced is finding good hardware, ... credit card reader and a memory card (now we ...
    (microsoft.public.vb.general.discussion)
  • Swapped HD, now computer wont boot
    ... Computer A has been in storage for some time, thus, Computer B is up- ... I really want to have the built-in memory card reader in the computer ...
    (microsoft.public.windowsxp.general)