Re: how to start the sound system
- From: Kay Smarczewski <kay@xxxxxxxxxxxxxxxxxx>
- Date: Tue, 17 Oct 2006 17:17:36 +0200
On Mon, Oct 16, 2006 at 08:35:24PM +0200, Florian Kulzer wrote:
On Mon, Oct 16, 2006 at 18:28:41 +0200, Jabka Atu wrote:
Howdy,...
i own acer 5102wlmi and im unable to start the sound system :
debian:/home/mha13# lsmod|grep snd
snd_seq_oss 35840 0
snd_seq_midi 9792 0
snd_rawmidi 27556 1 snd_seq_midi
snd_seq_midi_event 9728 2 snd_seq_oss,snd_seq_midi
snd_seq_device 9612 3 snd_seq_oss,snd_seq_midi,snd_rawmidi
snd_seq 58816 5 snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_ioctl32 17920 0
snd_pcm_oss 57704 0
snd_mixer_oss 20032 1 snd_pcm_oss
snd_pcm 105864 2 snd_ioctl32,snd_pcm_oss
snd_page_alloc 13904 1 snd_pcm
snd_timer 26440 2 snd_seq,snd_pcm
snd 58952 11
snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq_midi_event,snd_seq_device,snd_seq,snd_ioctl32,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 12000 1 snd
im using
kernel Linux debian 2.6.8-12-amd64-k8-smp #1 SMP Mon Jul 17 00:17:20 UTC
2006 x86_64 GNU/Linux
when i start alsaconf i get no supported pci card.
i have installed alsa-utils alsa-base and alsa-oss
Your kernel version suggests that you run Sarge. The version of alsa in
Sarge might be too old to support your hardware. Please post the output
of "lspci | grep -i audio" to let us know which soundcard is used. (That
has higher chances of success than hoping that someone will know it
directly from the model number of the laptop.)
--
Regards,
Florian
--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx
with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx
I have the same laptop and the same problem.
The only difference is that i have the kernel 2.6.19rc2.
lspci | grep -i audio :
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
I tried to compile alsa for myself because i think i have to use a newer
alsa. so i downloaded the 1.0.13rc3 and did the following:
tar -xfj alsa-driver-1.0.13rc3
cd alsa-driver-1.0.13rc3/
./configure --with-cards=hda-intel --with-sequencer=yes;make;
and got these errors:
make[1]: Entering directory `/usr/src/linux-2.6.19rc2'
CC [M] /usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.o
In Datei, eingefügt von
/usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.c:1:
/usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.inc:1:26: Fehler:
linux/config.h: Datei oder Verzeichnis nicht gefunden
In file included from
/usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.inc:13,
from
/usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.c:1:
/usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:742:
Fehler: Redefinition von »jiffies_to_msecs«
include/linux/jiffies.h:268: Fehler: Vorherige
Definition von »jiffies_to_msecs« war hier
/usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:761:
Fehler: Redefinition von »msecs_to_jiffies«
include/linux/jiffies.h:290: Fehler: Vorherige
Definition von »msecs_to_jiffies« war hier
/usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:
In Funktion »snd_pci_orig_save_state«:
/usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:1099:
Fehler: zu viele Argumente für Funktion
»pci_save_state«
/usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:
In Funktion »snd_pci_orig_restore_state«:
/usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:1103:
Fehler: zu viele Argumente für Funktion
»pci_restore_state«
make[4]: ***
[/usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.o]
Fehler 1
make[3]: ***
[/usr/src/alsa/alsa-driver-1.0.13rc3/acore] Fehler 2
make[2]: ***
[_module_/usr/src/alsa/alsa-driver-1.0.13rc3] Fehler
2
make[1]: *** [modules] Fehler 2
make[1]: Leaving directory `/usr/src/linux-2.6.19rc2'
make: *** [compile] Fehler 2
and so i could not execute make install.
i tried also this:
Creating /etc/modutils/mythings with following content:
alias snd-card-0 snd-hda-intel
options snd-hda-intel model=acer position_fix=1 enable=yes
and execute:
# update-modules.modutils
and got:
Architecture-specific modutils configuration for x86_64 not found, using
defaults
i don't know what i can do. can someone help us please?
Kay
--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx
with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx
- Follow-Ups:
- Re: how to start the sound system
- From: Florian Kulzer
- Re: how to start the sound system
- From: Kay Smarczewski
- Re: how to start the sound system
- References:
- how to start the sound system
- From: Jabka Atu
- Re: how to start the sound system
- From: Florian Kulzer
- how to start the sound system
- Prev by Date: Re: NIS configuration
- Next by Date: mdb plugins for Konqueror or Opera?
- Previous by thread: Re: how to start the sound system
- Next by thread: Re: how to start the sound system
- Index(es):
Relevant Pages
|
