Re: problem with netinstall of AMD64 Etch.....
- From: Paul E Condon <pecondon@xxxxxxxxxxxxxxxx>
- Date: Thu, 25 Jan 2007 10:56:15 -0700
On Thu, Jan 25, 2007 at 05:17:50PM +0000, Michael Fothergill wrote:
Dear Debianists,
I bought a new AMD64 3200 Sempron box. I put a DVD rewriter and an ATA
drive in it. I fired it up and it read in the net install CD for Debian
Etch AMD64 Official Snapshot (Ithink that's the AMD testing RC1 image).
It seemed to go OK. The network autoconfiguration succeeded which I
interpret to mean it found the internet connection to the NTL cable
broadband service I use.....
I partitioned the disk and installed the base system.
But at the package installer bit it starts to look for ftp sites to
download files for the network install....
I chose the UK options and went in all of the uk site choices but it kept
telling me that the network connection was bad.
It said that this either meant that there was no appropriate AMD64 install
image or the site or network connection was down etc....
In the end I just did the rest of the base install..... I also could not
get the security updates.
I finished the minimal install and then I hooked up my old box. When I
fired it up (Etch RC1 bog standard i386 install) it said the internet
connection was wired but when I fired up Iceweasel it could not see
google....
Is you i386 box different from you AMD box? Can you ping one from the
other on you L(ocal)AN? I found that my new ASUS mother board for my
new AMD cpu had an Ethernet chip that's not yet supported in Debian.
The chip was detected by the installer but there was not a visible
error message that the LAN was not found. I solved the problem by
installing an old ethernet card for which drivers were available and
moving the ethernet cable.
This usually means something is wrong with the internet link.
So I rebooted the cable box and then I rebooted the i386 box.
Now the internet link is OK.
My question is this:
If I want to go back to the new AMD64 box and try to get the net install to
work, what is the best way forward?
When I log in I will just get the command line interface. What can I do to
check that the new box is seeing the internet connection properly and what
can I then do to get the machine to download the rest of the AMD64 install
from the internet?
The apt sources.lst file just has the Etch netinstall disk in it at the
moment,
If I can't get it to work then I will download DVD images of the AMD64
release and install with them instead.
Comments appreciated.
Regards
Michael Fothergill
_________________________________________________________________
Get Hotmail, News, Sport and Entertainment from MSN on your mobile.
http://www.msn.txt4content.com/
--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx
with a subject of "unsubscribe". Trouble? Contact
listmaster@xxxxxxxxxxxxxxxx
--
Paul E Condon
pecondon@xxxxxxxxxxxxxxxx
--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx
with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx
- Follow-Ups:
- Re: problem with netinstall of AMD64 Etch.....
- From: Michael Fothergill
- Re: problem with netinstall of AMD64 Etch.....
- References:
- problem with netinstall of AMD64 Etch.....
- From: Michael Fothergill
- problem with netinstall of AMD64 Etch.....
- Prev by Date: Re: replying to a message in debian-user
- Next by Date: How to make Pentium 133 work with 2.6.8 kernel?
- Previous by thread: problem with netinstall of AMD64 Etch.....
- Next by thread: Re: problem with netinstall of AMD64 Etch.....
- Index(es):
Relevant Pages
|
