ethernet bonding and interface speed
- From: "Birju Prajapati" <floating.buddha@xxxxxxxxx>
- Date: Fri, 23 Feb 2007 11:20:06 +0000
Hi,
I have two network cards that are both displaying as such:
dbadmin@livedb:~$ sudo mii-tool
eth0: no autonegotiation, 100baseTx-HD, link ok
eth1: no autonegotiation, 100baseTx-HD, link ok
I have bonded them in modprope.d as such:
alias bond0 bonding
options bonding mode=0 miimon=100 downdelay=200 updelay=200
However the bonded interface is only 10Meg Half duplex:
dbadmin@livedb:~$ sudo mii-tool bond0
bond0: 10 Mbit, half duplex, link ok
Why is this? Is it safe to use 'ethtool -s' to increase the speed of
the bonded interface? I don't want it to crash as the server is hosted
elsewhere and would involve a long trip to fix!
Thanks in advance,
Birju
FYI:
dbadmin@livedb:~$ /sbin/ifconfig
bond0 Link encap:Ethernet HWaddr 00:16:35:82:6F:B2
inet addr:10.114.1.2 Bcast:10.114.255.255 Mask:255.255.0.0
inet6 addr: fe80::216:35ff:fe82:6fb2/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:2015931 errors:0 dropped:0 overruns:0 frame:0
TX packets:16802 errors:36 dropped:0 overruns:0 carrier:36
collisions:482 txqueuelen:0
RX bytes:141796056 (135.2 MiB) TX bytes:2176740 (2.0 MiB)
eth0 Link encap:Ethernet HWaddr 00:16:35:82:6F:B2
inet6 addr: fe80::216:35ff:fe82:6fb2/64 Scope:Link
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:1007946 errors:0 dropped:0 overruns:0 frame:0
TX packets:8402 errors:20 dropped:0 overruns:0 carrier:20
collisions:264 txqueuelen:1000
RX bytes:70971311 (67.6 MiB) TX bytes:1090935 (1.0 MiB)
Interrupt:66 Memory:fc000000-fc011100
eth1 Link encap:Ethernet HWaddr 00:16:35:82:6F:B2
inet6 addr: fe80::216:35ff:fe82:6fb2/64 Scope:Link
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:1007985 errors:0 dropped:0 overruns:0 frame:0
TX packets:8400 errors:16 dropped:0 overruns:0 carrier:16
collisions:218 txqueuelen:1000
RX bytes:70824745 (67.5 MiB) TX bytes:1085805 (1.0 MiB)
Interrupt:114 Memory:fa000000-fa011100
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:28961 errors:0 dropped:0 overruns:0 frame:0
TX packets:28961 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9832203 (9.3 MiB) TX bytes:9832203 (9.3 MiB)
--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx
- Follow-Ups:
- Re: ethernet bonding and interface speed
- From: Scott Reese
- Re: ethernet bonding and interface speed
- Prev by Date: Re: Opening ports in Shorewall in order to run an America's Army server
- Next by Date: Re: Hoster with Debian Etch support in the USA
- Previous by thread: Re: /dev/lp0 - Permission denied after CUPS upgrade
- Next by thread: Re: ethernet bonding and interface speed
- Index(es):