Re: Mozilla and Flash

Yes it is Sarge, but do you mean I won't be able to use Flash unless I
upgrade to Etch? Maybe the world has moved on from Sarge and Flash 7??

On 4/4/07, Greg Folkert <greg@xxxxxxxxxxxxxxx> wrote:
On Wed, 2007-04-04 at 10:23 -0500, Dave Walker wrote:
> 7.0.25

Your version number, herein lies your problem. I am assuming you are
using Sarge, correct?

If so, there are some methods to fix this, but your best bet is to
upgrade to Etch in a few days, after it is released.
--
greg, greg@xxxxxxxxxxxxxxx

Novell's Directory Services is a competitive product to Microsoft's
Active Directory in much the same way that the Saturn V is a competitive
product to those dinky little model rockets that kids light off down at
the playfield. -- Thane Walkup


--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx
with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx




--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx

Relevant Pages

  • Re: Error trying to run apt-get
    ... I would go to Etch first, ... I believe what I did was just run an apt-get upgrade last week(or dist- ... You run an old 2.6 kernel (2.6.7, standard Sarge has ... would be safer to make this transition of your system in smaller steps, ...
    (Debian-User)
  • Re: Release of Stable Etch
    ... Sarge was still in testing at the time. ... Sarge had a problem, where during the upgrade The Xserver was shutdown, and I ... Sources on this one are now pointing to Etch, ... This Etch install will go back onto testing when Etch goes stable, ...
    (Debian-User)
  • Re: etch upgrade problem
    ... Please note that the release notes that cover the upgrade say _not_ to ... I've recently upgraded a Sarge install to Etch with X running, ... Now that Etch is stable I think I will put this Etch install back on testing, ...
    (Debian-User)
  • Re: Xfree86 problems, sarge/woody
    ... X was running after that first stage of the upgrade (to latest woody) ... as easily debug it on sarge as on woody. ... I am very much looking forward to etch - its version of X seems ...
    (Debian-User)
  • Xorg upgrade: xdm fails, xterm cant change fonts?
    ... I finally bit the bullet and upgraded my desktop (etch) machine this ... it) I get two failure message and then the emergency xterm mode. ... I sure hope that the upgrade ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ...
    (Debian-User)