Re: problems installing with 'writemaster' CDROM

On Sat, 2007-07-28 at 14:47 +0100, Wackojacko wrote:
michael wrote:
Folks, I've a new machine

Its likely that the machine has more bearing on this problem than the
CDROM itself. We need more information regarding the Motherboard and in
particular the IDE or SATA chip the drive is connected to.

with a "writemaster" CDROM drive. When trying
to install Debian 4.0 from iso image burnt to CD, it initially
recognises the CD and starts the installation but fails at the screen
where the CD drive is to be recognised (for continuing the
installation). I've tried various module/device combos but all to no
avail. I've looked about on Google but not come up with a working
solution.

Has anybody else successfully uses this CDROM drive to install Debian,
or have suggestions on how I can determine a working module/device
combo. Please let me know if you need any further information.

here's some more info (snippets from 'dmesg'):
sd 1:0:0:0: [sdb] Attached SCSI disk
ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x0000000000012128 ctl 0x000000000001214e
bmdma 0x00000000000120f0 irq 19
ata4: SATA max UDMA/133 cmd 0x0000000000012120 ctl 0x000000000001214a
bmdma 0x00000000000120f8 irq 19
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
scsi4 : pata_marvell
scsi5 : pata_marvell
ata5: PATA max UDMA/100 cmd 0x0000000000011018 ctl 0x0000000000011026
bmdma 0x0000000000011000 irq 17
ata6: DUMMY
BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00
0B:00 0C:01 0D:00 0E:00 0F:00
ata5.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB03, max UDMA/33
ata5.00: configured for UDMA/33
scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB03 PQ: 0
ANSI: 5
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel@xxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.

sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 4:0:0:0: Attached scsi generic sg2 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
iTCO_vendor_support: vendor-support=0
ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:19.0 to 64
Floppy drive(s): fd0 is 1.44M
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
FDC 0 is a National Semiconductor PC87306

cdrom: sr0: mrw address space DMA selected
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts



--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx
with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx

Relevant Pages