Re: Failure of Ethernet link with Belkin adapter & Netgear hub.
- From: Brian McKee <map@xxxxxxxxxxx>
- Date: Mon, 10 Mar 2008 09:48:58 -0400
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 8-Mar-08, at 4:07 PM, PETER EASTHOPE wrote:
Folk,
If an Etch system is connected to the 'net _via_ a
Belkin Model F5D5050 USB 10/100 Ethernet Adapter,
an old AT-3612TR hub and a Netgear DS104 hub,
communication works at 10 Mb/s, half duplex. The
light on the Belkin adapter is green.
If the AT hub is removed and the Belkin adapter is
connected directly to the Netgear hub, its 100 Mb/s
link light goes on while the Belkin light goes amber.
ethtool reports 100 Mb/s, half on the adapter but
communication fails.
Can anyone say whether this more likely a problem
with hardware or a problem with the Pegasus driver
which runs the Belkin adapter. In the second case,
I suppose a bug report is warranted.
Is one port on one hub or the other set to 'uplink' ?
i.e. is your problem that you need a cross-over cable not a straight thru when you remove the AT hub? (or even vice versa)
Brian
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (Darwin)
Comment: Verify this email or encrypt your email for free - see gnupg.org
iD8DBQFH1TxLGnOmb9xIQHQRAkiFAJ0bmEv9EgI0QXFN8cMQNw4ts6BlEQCZAQzT
aD2dQ7kbDna97FN7E1ZHaTM=
=JQ/o
-----END PGP SIGNATURE-----
--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx
- References:
- Failure of Ethernet link with Belkin adapter & Netgear hub.
- From: PETER EASTHOPE
- Failure of Ethernet link with Belkin adapter & Netgear hub.
- Prev by Date: Re: Converting from console-tools style keymap to console-setup xkb style keymap
- Next by Date: 4.0R3 SATA support (or lack thereof)
- Previous by thread: Re: Failure of Ethernet link with Belkin adapter & Netgear hub.
- Next by thread: Re: Failure of Ethernet link with Belkin adapter & Netgear hub.
- Index(es):
Relevant Pages
|
