Re: Monitor CPU temperature in a Supermicro X6DH8-XG2

Ron Johnson wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 05/21/08 09:01, Brian Schrock wrote:

On Wed, May 21, 2008 at 9:02 AM, Ron Johnson <ron.l.johnson@xxxxxxx
<mailto:ron.l.johnson@xxxxxxx>> wrote:

On 05/21/08 06:45, Santi Saez wrote:

Dear Srs,
I need to get the CPU temperature in a Supermicro X6DH8-XG2
motherboard,
this is the link for key features:

http://www.supermicro.com/products/motherboard/Xeon800/E7520/X6DH8-XG2.cfm

According with the page specs, X6DH8-XG2 seems to have some thermal
monitoring chip/hardware:
* Monitoring for CPU and chassis environment
* CPU thermal trip support
* Thermal Monitor 2 support
When running lm-sensors 2.10.1-3 (with libsensors3) on a Debian
Etch box
I get:
# sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
This is the output for "sensors-detect":

=========================================================================================


(..)
# I2C adapter drivers
i2c-i801
# Chip drivers
# Warning: the required module lm93 is not currently installed
# on your system. For status of 2.6 kernel ports check
# http://www.lm-sensors.org/wiki/Devices. If driver is built
# into the kernel, or unavailable, comment out the following line.
lm93
# no driver for Nat. Semi. PC87427 Super IO Fan Sensors yet
Did you go to the mentioned web site to look to see whether the
PC87427 is supported by lm-sensors 2.10.1-3?

*I* did. But then, I'm not the OP.


Let's see. How do I say this... The suspense is killing me... *Is the PC87427 chip supported?*


Hugo




--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx

Relevant Pages

  • Re: Monitor CPU temperature in a Supermicro X6DH8-XG2
    ... I need to get the CPU temperature in a Supermicro X6DH8-XG2 motherboard, ... No sensors found! ... Make sure you loaded all the kernel drivers you need. ... I use Supermicro motherboards, and assuming you did install the ipmi card ...
    (Debian-User)
  • Re: Monitor CPU temperature in a Supermicro X6DH8-XG2
    ... I need to get the CPU temperature in a Supermicro X6DH8-XG2 motherboard, ... No sensors found! ... Make sure you loaded all the kernel drivers you need. ...
    (Debian-User)
  • System temperature monitoring software for OS 8.6?
    ... monitoring of system temperatures like CPU, or at least the sensors in ...
    (comp.sys.mac.system)
  • Re: Porting OpenBSDs sysctl hw.sensors framework to FreeBSD
    ... that's how all the RAID utilities I've used work. ... John, I'm sorry to disappoint you, but RAID drivers in OpenBSD don't implement SMTP and don't do emails, they only provide updates to the sensors framework when there are some changes in the state of the drive. ... You can only do monitoring via hw.sensors for cissand ami, and the example for monitoring amiin the manpage shows that you can only get volume level data, and as a _string_ and that you can't get backing physical drive status to know which physical drive has failed and needs to be replaced: ...
    (freebsd-arch)
  • Clocksource tsc is always unstable with 2.6.25-* kernels and CONFIG_NO_HZ=y on my box
    ... Switched to high resolution mode on CPU 1 ... Another strange thing is when I try to boot that kernel with clocksource=acpi_pm it just hangs. ... # Parallel IDE high-level drivers ...
    (Linux-Kernel)