Re: Router IPv6



On Sat, Aug 9, 2008 at 8:07 PM, Alex Samad <alex@xxxxxxxxxxxx> wrote:

have a look at ip6tables and ip especially ip -6 a and ip -6 r, packages to look at
radvd. Also sysctl -a | grep ipv6

Dear Alex and Andrew, thank you for your hints.

Here's the result of sysctl -a | grep ipv6 command[1]. I'll do the
"research" more deeply later.

--
Zaki Akhmad
[1] # sysctl -a | grep ipv6
error: "Invalid argument" reading key "fs.binfmt_misc.register"
error: "Invalid argument" reading key "dev.parport.parport0.autoprobe"
error: "Invalid argument" reading key "dev.parport.parport0.autoprobe0"
error: "Invalid argument" reading key "dev.parport.parport0.autoprobe1"
error: "Invalid argument" reading key "dev.parport.parport0.autoprobe2"
error: "Invalid argument" reading key "dev.parport.parport0.autoprobe3"
error: permission denied on key 'net.ipv4.route.flush'
net.ipv6.neigh.default.mcast_solicit = 3
net.ipv6.neigh.default.ucast_solicit = 3
net.ipv6.neigh.default.app_solicit = 0
net.ipv6.neigh.default.retrans_time = 250
net.ipv6.neigh.default.base_reachable_time = 30
net.ipv6.neigh.default.delay_first_probe_time = 5
net.ipv6.neigh.default.gc_stale_time = 60
net.ipv6.neigh.default.unres_qlen = 3
net.ipv6.neigh.default.proxy_qlen = 64
net.ipv6.neigh.default.anycast_delay = 100
net.ipv6.neigh.default.proxy_delay = 80
net.ipv6.neigh.default.locktime = 0
net.ipv6.neigh.default.retrans_time_ms = 1000
net.ipv6.neigh.default.base_reachable_time_ms = 30000
net.ipv6.neigh.default.gc_interval = 30
net.ipv6.neigh.default.gc_thresh1 = 128
net.ipv6.neigh.default.gc_thresh2 = 512
net.ipv6.neigh.default.gc_thresh3 = 1024
net.ipv6.neigh.lo.mcast_solicit = 3
net.ipv6.neigh.lo.ucast_solicit = 3
net.ipv6.neigh.lo.app_solicit = 0
net.ipv6.neigh.lo.retrans_time = 250
net.ipv6.neigh.lo.base_reachable_time = 30
net.ipv6.neigh.lo.delay_first_probe_time = 5
net.ipv6.neigh.lo.gc_stale_time = 60
net.ipv6.neigh.lo.unres_qlen = 3
net.ipv6.neigh.lo.proxy_qlen = 64
net.ipv6.neigh.lo.anycast_delay = 100
net.ipv6.neigh.lo.proxy_delay = 80
net.ipv6.neigh.lo.locktime = 0
net.ipv6.neigh.lo.retrans_time_ms = 1000
net.ipv6.neigh.lo.base_reachable_time_ms = 30000
net.ipv6.neigh.eth0.mcast_solicit = 3
net.ipv6.neigh.eth0.ucast_solicit = 3
net.ipv6.neigh.eth0.app_solicit = 0
net.ipv6.neigh.eth0.retrans_time = 250
net.ipv6.neigh.eth0.base_reachable_time = 30
net.ipv6.neigh.eth0.delay_first_probe_time = 5
net.ipv6.neigh.eth0.gc_stale_time = 60
net.ipv6.neigh.eth0.unres_qlen = 3
net.ipv6.neigh.eth0.proxy_qlen = 64
net.ipv6.neigh.eth0.anycast_delay = 100
net.ipv6.neigh.eth0.proxy_delay = 80
net.ipv6.neigh.eth0.locktime = 0
net.ipv6.neigh.eth0.retrans_time_ms = 1000
net.ipv6.neigh.eth0.base_reachable_time_ms = 30000
net.ipv6.neigh.wmaster0.mcast_solicit = 3
net.ipv6.neigh.wmaster0.ucast_solicit = 3
net.ipv6.neigh.wmaster0.app_solicit = 0
net.ipv6.neigh.wmaster0.retrans_time = 250
net.ipv6.neigh.wmaster0.base_reachable_time = 30
net.ipv6.neigh.wmaster0.delay_first_probe_time = 5
net.ipv6.neigh.wmaster0.gc_stale_time = 60
net.ipv6.neigh.wmaster0.unres_qlen = 3
net.ipv6.neigh.wmaster0.proxy_qlen = 64
net.ipv6.neigh.wmaster0.anycast_delay = 100
net.ipv6.neigh.wmaster0.proxy_delay = 80
net.ipv6.neigh.wmaster0.locktime = 0
net.ipv6.neigh.wmaster0.retrans_time_ms = 1000
net.ipv6.neigh.wmaster0.base_reachable_time_ms = 30000
net.ipv6.neigh.wlan0.mcast_solicit = 3
net.ipv6.neigh.wlan0.ucast_solicit = 3
net.ipv6.neigh.wlan0.app_solicit = 0
net.ipv6.neigh.wlan0.retrans_time = 250
net.ipv6.neigh.wlan0.base_reachable_time = 30
net.ipv6.neigh.wlan0.delay_first_probe_time = 5
net.ipv6.neigh.wlan0.gc_stale_time = 60
error: permission denied on key 'net.ipv6.route.flush'
net.ipv6.neigh.wlan0.unres_qlen = 3
net.ipv6.neigh.wlan0.proxy_qlen = 64
net.ipv6.neigh.wlan0.anycast_delay = 100
net.ipv6.neigh.wlan0.proxy_delay = 80
net.ipv6.neigh.wlan0.locktime = 0
net.ipv6.neigh.wlan0.retrans_time_ms = 1000
net.ipv6.neigh.wlan0.base_reachable_time_ms = 30000
net.ipv6.route.gc_thresh = 1024
net.ipv6.route.max_size = 4096
net.ipv6.route.gc_min_interval = 0
net.ipv6.route.gc_timeout = 60
net.ipv6.route.gc_interval = 30
net.ipv6.route.gc_elasticity = 0
net.ipv6.route.mtu_expires = 600
net.ipv6.route.min_adv_mss = 4
net.ipv6.route.gc_min_interval_ms = 500
net.ipv6.icmp.ratelimit = 250
net.ipv6.bindv6only = 0
net.ipv6.mld_max_msf = 64
net.ipv6.conf.all.forwarding = 0
net.ipv6.conf.all.hop_limit = 64
net.ipv6.conf.all.mtu = 1280
net.ipv6.conf.all.accept_ra = 1
net.ipv6.conf.all.accept_redirects = 1
net.ipv6.conf.all.autoconf = 1
net.ipv6.conf.all.dad_transmits = 1
net.ipv6.conf.all.router_solicitations = 3
net.ipv6.conf.all.router_solicitation_interval = 4
net.ipv6.conf.all.router_solicitation_delay = 1
net.ipv6.conf.all.force_mld_version = 0
net.ipv6.conf.all.use_tempaddr = 0
net.ipv6.conf.all.temp_valid_lft = 604800
net.ipv6.conf.all.temp_prefered_lft = 86400
net.ipv6.conf.all.regen_max_retry = 5
net.ipv6.conf.all.max_desync_factor = 600
net.ipv6.conf.all.max_addresses = 16
net.ipv6.conf.all.accept_ra_defrtr = 1
net.ipv6.conf.all.accept_ra_pinfo = 1
net.ipv6.conf.all.accept_ra_rtr_pref = 1
net.ipv6.conf.all.router_probe_interval = 60
net.ipv6.conf.all.accept_ra_rt_info_max_plen = 0
net.ipv6.conf.all.proxy_ndp = 0
net.ipv6.conf.all.accept_source_route = 0
net.ipv6.conf.all.optimistic_dad = 0
net.ipv6.conf.default.forwarding = 0
net.ipv6.conf.default.hop_limit = 64
net.ipv6.conf.default.mtu = 1280
net.ipv6.conf.default.accept_ra = 1
net.ipv6.conf.default.accept_redirects = 1
net.ipv6.conf.default.autoconf = 1
net.ipv6.conf.default.dad_transmits = 1
net.ipv6.conf.default.router_solicitations = 3
net.ipv6.conf.default.router_solicitation_interval = 4
net.ipv6.conf.default.router_solicitation_delay = 1
net.ipv6.conf.default.force_mld_version = 0
net.ipv6.conf.default.use_tempaddr = 0
net.ipv6.conf.default.temp_valid_lft = 604800
net.ipv6.conf.default.temp_prefered_lft = 86400
net.ipv6.conf.default.regen_max_retry = 5
net.ipv6.conf.default.max_desync_factor = 600
net.ipv6.conf.default.max_addresses = 16
net.ipv6.conf.default.accept_ra_defrtr = 1
net.ipv6.conf.default.accept_ra_pinfo = 1
net.ipv6.conf.default.accept_ra_rtr_pref = 1
net.ipv6.conf.default.router_probe_interval = 60
net.ipv6.conf.default.accept_ra_rt_info_max_plen = 0
net.ipv6.conf.default.proxy_ndp = 0
net.ipv6.conf.default.accept_source_route = 0
net.ipv6.conf.default.optimistic_dad = 0
net.ipv6.conf.lo.forwarding = 0
net.ipv6.conf.lo.hop_limit = 64
net.ipv6.conf.lo.mtu = 16436
net.ipv6.conf.lo.accept_ra = 1
net.ipv6.conf.lo.accept_redirects = 1
net.ipv6.conf.lo.autoconf = 1
net.ipv6.conf.lo.dad_transmits = 1
net.ipv6.conf.lo.router_solicitations = 3
net.ipv6.conf.lo.router_solicitation_interval = 4
net.ipv6.conf.lo.router_solicitation_delay = 1
net.ipv6.conf.lo.force_mld_version = 0
net.ipv6.conf.lo.use_tempaddr = -1
net.ipv6.conf.lo.temp_valid_lft = 604800
net.ipv6.conf.lo.temp_prefered_lft = 86400
net.ipv6.conf.lo.regen_max_retry = 5
net.ipv6.conf.lo.max_desync_factor = 600
net.ipv6.conf.lo.max_addresses = 16
net.ipv6.conf.lo.accept_ra_defrtr = 1
net.ipv6.conf.lo.accept_ra_pinfo = 1
net.ipv6.conf.lo.accept_ra_rtr_pref = 1
net.ipv6.conf.lo.router_probe_interval = 60
net.ipv6.conf.lo.accept_ra_rt_info_max_plen = 0
net.ipv6.conf.lo.proxy_ndp = 0
net.ipv6.conf.lo.accept_source_route = 0
net.ipv6.conf.lo.optimistic_dad = 0
net.ipv6.conf.eth0.forwarding = 0
net.ipv6.conf.eth0.hop_limit = 64
net.ipv6.conf.eth0.mtu = 1500
net.ipv6.conf.eth0.accept_ra = 1
net.ipv6.conf.eth0.accept_redirects = 1
net.ipv6.conf.eth0.autoconf = 1
net.ipv6.conf.eth0.dad_transmits = 1
net.ipv6.conf.eth0.router_solicitations = 3
net.ipv6.conf.eth0.router_solicitation_interval = 4
net.ipv6.conf.eth0.router_solicitation_delay = 1
net.ipv6.conf.eth0.force_mld_version = 0
net.ipv6.conf.eth0.use_tempaddr = 0
net.ipv6.conf.eth0.temp_valid_lft = 604800
net.ipv6.conf.eth0.temp_prefered_lft = 86400
net.ipv6.conf.eth0.regen_max_retry = 5
net.ipv6.conf.eth0.max_desync_factor = 600
net.ipv6.conf.eth0.max_addresses = 16
net.ipv6.conf.eth0.accept_ra_defrtr = 1
net.ipv6.conf.eth0.accept_ra_pinfo = 1
net.ipv6.conf.eth0.accept_ra_rtr_pref = 1
net.ipv6.conf.eth0.router_probe_interval = 60
net.ipv6.conf.eth0.accept_ra_rt_info_max_plen = 0
net.ipv6.conf.eth0.proxy_ndp = 0
net.ipv6.conf.eth0.accept_source_route = 0
net.ipv6.conf.eth0.optimistic_dad = 0
net.ipv6.conf.wmaster0.forwarding = 0
net.ipv6.conf.wmaster0.hop_limit = 64
net.ipv6.conf.wmaster0.mtu = 1500
net.ipv6.conf.wmaster0.accept_ra = 1
net.ipv6.conf.wmaster0.accept_redirects = 1
net.ipv6.conf.wmaster0.autoconf = 1
net.ipv6.conf.wmaster0.dad_transmits = 1
net.ipv6.conf.wmaster0.router_solicitations = 3
net.ipv6.conf.wmaster0.router_solicitation_interval = 4
net.ipv6.conf.wmaster0.router_solicitation_delay = 1
net.ipv6.conf.wmaster0.force_mld_version = 0
net.ipv6.conf.wmaster0.use_tempaddr = 0
net.ipv6.conf.wmaster0.temp_valid_lft = 604800
net.ipv6.conf.wmaster0.temp_prefered_lft = 86400
net.ipv6.conf.wmaster0.regen_max_retry = 5
net.ipv6.conf.wmaster0.max_desync_factor = 600
net.ipv6.conf.wmaster0.max_addresses = 16
net.ipv6.conf.wmaster0.accept_ra_defrtr = 1
net.ipv6.conf.wmaster0.accept_ra_pinfo = 1
net.ipv6.conf.wmaster0.accept_ra_rtr_pref = 1
net.ipv6.conf.wmaster0.router_probe_interval = 60
net.ipv6.conf.wmaster0.accept_ra_rt_info_max_plen = 0
net.ipv6.conf.wmaster0.proxy_ndp = 0
net.ipv6.conf.wmaster0.accept_source_route = 0
net.ipv6.conf.wmaster0.optimistic_dad = 0
net.ipv6.conf.wlan0.forwarding = 0
net.ipv6.conf.wlan0.hop_limit = 64
net.ipv6.conf.wlan0.mtu = 1500
net.ipv6.conf.wlan0.accept_ra = 1
net.ipv6.conf.wlan0.accept_redirects = 1
net.ipv6.conf.wlan0.autoconf = 1
net.ipv6.conf.wlan0.dad_transmits = 1
net.ipv6.conf.wlan0.router_solicitations = 3
net.ipv6.conf.wlan0.router_solicitation_interval = 4
net.ipv6.conf.wlan0.router_solicitation_delay = 1
net.ipv6.conf.wlan0.force_mld_version = 0
net.ipv6.conf.wlan0.use_tempaddr = 0
net.ipv6.conf.wlan0.temp_valid_lft = 604800
net.ipv6.conf.wlan0.temp_prefered_lft = 86400
net.ipv6.conf.wlan0.regen_max_retry = 5
net.ipv6.conf.wlan0.max_desync_factor = 600
net.ipv6.conf.wlan0.max_addresses = 16
net.ipv6.conf.wlan0.accept_ra_defrtr = 1
net.ipv6.conf.wlan0.accept_ra_pinfo = 1
net.ipv6.conf.wlan0.accept_ra_rtr_pref = 1
net.ipv6.conf.wlan0.router_probe_interval = 60
net.ipv6.conf.wlan0.accept_ra_rt_info_max_plen = 0
net.ipv6.conf.wlan0.proxy_ndp = 0
net.ipv6.conf.wlan0.accept_source_route = 0
net.ipv6.conf.wlan0.optimistic_dad = 0
net.ipv6.ip6frag_high_thresh = 262144
net.ipv6.ip6frag_low_thresh = 196608
net.ipv6.ip6frag_time = 60
net.ipv6.ip6frag_secret_interval = 600


--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx
with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx



Relevant Pages

  • Re: SYN Attacks - how i cant stop it
    ... "sysctl: unknown oid...." ... Then use stateful inspection and dynamic rules for the ... > rest of the wall. ... To unsubscribe, ...
    (FreeBSD-Security)
  • Re: SYN Attacks - how i cant stop it
    ... "sysctl: unknown oid...." ... Then use stateful inspection and dynamic rules for the ... > rest of the wall. ... To unsubscribe, ...
    (freebsd-questions)
  • Re: Problem Tuning Maxsockets
    ... > I am trying to alter the number of maxsockets allocated from the default ... > operation via sysctl I'm informed the oid is read ... To unsubscribe, ...
    (freebsd-questions)
  • RE: kswapd issue
    ... What I was missing earlier was "did not run sysctl -p" after changing ... damage you may sustain as a result of any virus in this e-mail. ... Infosys reserves the right to monitor and review the content ... unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe ...
    (RedHat)
  • Re: Routing RH 8
    ... General Red Hat Linux discussion list ... to 1 and then run sysctl manually to set it for the active session ... unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe ...
    (RedHat)