debian lenny serial console garbage with a cyclades

Hello,

I have a few dell poweredge servers (with debian lenny) connected
through a serial port with a cyclades console server.

I can log in into the cyclades and connect to one of this server. Then,
I can see the boot of the server and so on.

The problem I have is that during the boot, while loading drivers, when
it loads serial driver, I get a lot of garbage and console doesn't work
until login (that is, I can't see messages displays by init.d scripts).
When login is run, it works again without any problem.

The garbage I get is:

[ 2.982482] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharingd
[ 2.991704] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 2.998232] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
��������������������������������������������������������������������������������
Debian GNU/Linux 5.0 felis116 ttyS0

felis116 login:

Then, I can't see anything until login is reached.

The cyclades configuration for this port is (I configured it as a
Console (Telnet) port):

s26.tty ttyS26
s26.alias felis116
s26.issue \r\n Welcome to Console Server Management Server %h port S
%p \n\r\n
s26.speed 115200
s26.datasize 8
s26.stopbits 1
s26.parity none
s26.flow none
s26.dcd 0

any idea?

--
Angel L. Mateo Martínez
Sección de Telemática
Área de Tecnologías de la Información _o)
y las Comunicaciones Aplicadas (ATICA) / \\
http://www.um.es/atica _(___V
Tfo: 868887590
Fax: 868888337


--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx
with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx

Relevant Pages

  • Re: 6.0 on Dell 1850 with DRAC4 management card?
    ... for instance an old cyclades TS. ... >> get on your serial port through the console server via ssh. ... > to break to debugger on a power cycle of your cyclade. ...
    (freebsd-stable)
  • Re: debian lenny serial console garbage with a cyclades
    ... through a serial port with a cyclades console server. ... I can log in into the cyclades and connect to one of this server. ...
    (Debian-User)
  • Help! Console changes baud rate after login
    ... I have a Sunfire V240 with a serial console connected to a Cyclades ... The cyclades port is set to 9600 baud, and it connects to the system ... characters and the server hangs. ...
    (comp.unix.solaris)
  • RE: Some technical errors
    ... If the SMTP server is not running on port 25 TCP it is not a public ... Manager - Computer Assurance Services BDO Chartered Accountants & ...
    (Security-Basics)
  • Re: SRV RRs support in Internet Explorer?
    ... The port number could be implicit (i.e. ... At any point in time, a server could fail ... can't effectively LB or backup because NSs cache the records for the TTL ... I still don't see how SRV records would help backup or LB. ...
    (microsoft.public.win2000.dns)
Loading