ssd / smart question



SMART is warning a lot about a couple week old OCZ SSD. This is my first SSD, and I don't know if this is normal or I have a defective drive. Looks broken to me, but...

It's connected to an Asus AT3CG-I mobo.

Some output from webmin -- smart's writing in the logs quite a bit, too, about uncorrectable errors and such:

smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: OCZ-VERTEX
Serial Number: 26G39UFKZSO46VR1E334
Firmware Version: 1.5
User Capacity: 32,017,047,552 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Apr 15 20:02:18 2010 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x1d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 0) minutes.
Extended self-test routine
recommended polling time: ( 0) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 007 000 000 Old_age Offline In_the_past 0
9 Power_On_Hours 0x0000 155 001 000 Old_age Offline - 0
12 Power_Cycle_Count 0x0000 012 000 000 Old_age Offline In_the_past 0
184 Unknown_Attribute 0x0000 001 000 000 Old_age Offline In_the_past 0
195 Hardware_ECC_Recovered 0x0000 000 000 000 Old_age Offline FAILING_NOW 0
196 Reallocated_Event_Count 0x0000 000 000 000 Old_age Offline FAILING_NOW 0
197 Current_Pending_Sector 0x0000 000 000 000 Old_age Offline FAILING_NOW 0
198 Offline_Uncorrectable 0x0000 070 114 000 Old_age Offline - 1529
199 UDMA_CRC_Error_Count 0x0000 210 179 000 Old_age Offline - 609
200 Multi_Zone_Error_Rate 0x0000 096 078 000 Old_age Offline - 17
201 Soft_Read_Error_Rate 0x0000 193 151 000 Old_age Offline - 19
202 TA_Increase_Count 0x0000 103 105 000 Old_age Offline - 0
203 Run_Out_Cancel 0x0000 102 105 000 Old_age Offline - 0
204 Shock_Count_Write_Opern 0x0000 000 000 000 Old_age Offline FAILING_NOW 0
205 Shock_Rate_Write_Opern 0x0000 016 039 000 Old_age Offline - 0
206 Flying_Height 0x0000 001 000 000 Old_age Offline In_the_past 0
207 Spin_High_Current 0x0000 115 001 000 Old_age Offline - 0
208 Spin_Buzz 0x0000 115 000 000 Old_age Offline In_the_past 0
209 Offline_Seek_Performnce 0x0000 099 000 000 Old_age Offline In_the_past 0
211 Unknown_Attribute 0x0000 000 000 000 Old_age Offline FAILING_NOW 0
212 Unknown_Attribute 0x0000 000 000 000 Old_age Offline FAILING_NOW 0
213 Unknown_Attribute 0x0000 000 000 000 Old_age Offline FAILING_NOW 0

Warning: device does not support Error Logging
Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 1
No Errors Logged

Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

--
Glenn English
ghe@xxxxxxxxxxx




--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx
with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx
Archive: http://lists.debian.org/7F8176EA-AA0A-4EC2-BEA1-F0441DE2141F@xxxxxxxxxxx



Relevant Pages

  • Re: Making world but no kernel
    ... Actually fsck and disklabel needed to be heavily modified in order to support gvinum fully, mainly because the underlying device is very different from a standard drive. ... Offline data collection status: ... Self-test execution status: The previous self-test routine completed ... SMART Selective self-test log data structure revision number 1 ...
    (freebsd-stable)
  • Re: SETFEATURES SET TRANSFER MODE taskqueue timeout.. Error occuring constantly.. Please help!!
    ... SMART support is: Available - device has SMART capability. ... Offline data collection status: ... Self-test execution status: The previous self-test routine completed ... FR = Features Register [HEX] ...
    (freebsd-stable)
  • Re: Making world but no kernel
    ... SMART support is: Available - device has SMART capability. ... Offline data collection status: ... Self-test execution status: The previous self-test ...
    (freebsd-stable)
  • Re: nochmal Performanceproblem -> Korrektur der Fehlerausgabe!!!
    ... SMART support is: Available - device has SMART capability. ... Auto Offline Data Collection: Enabled. ... Self-test supported. ... FR = Features Register [HEX] ...
    (de.comp.hardware.laufwerke.festplatten)
  • Re: gmirror slice insertion, "FAILURE - READ_DMA status=51"
    ... Native Command Queuing yes - 31/0x1F ... SMART support is: Available - device has SMART capability. ... Offline data collection status: ... Self-test execution status: The previous self-test routine completed ...
    (freebsd-questions)