Re: monitor detection maybe not working

On 07/01/2011 03:46 PM, Brian wrote:
On Fri 01 Jul 2011 at 15:19:21 -0700, Paul Scott wrote:

VGA-1 connected 1024x768+0+0 (normal left inverted right x axis y axis)
0mm x 0mm
1024x768 60.0*
800x600 60.3 56.2
848x480 60.0
640x480 59.9
My LCD monitor's native resolution is 1280x1024
xrandr believes VGA-1 is only capable of 1024x768. Why do you believe
1280x1024 is possible?

1. The monitor keeps telling me it works better at 1280x1024.

2. ddcprobe gives several 1280x1024 choices.

Thanks,

Paul

[sudo] password for paul:
vbe: VESA 3.0 detected.
oem:
vendor: NVIDIA Corporation
product: CR17 Board Chip Rev A3
memory: 32768kb
mode: 640x400x256
mode: 640x480x256
mode: 800x600x16
mode: 800x600x256
mode: 320x200x64k
mode: 320x200x16m
mode: 640x480x64k
mode: 640x480x16m
mode: 800x600x64k
mode: 800x600x16m
edid:
edid: 1 3
id: 631e
eisa: VSC631e
serial: dadb6101
manufacture: 34 2006
input: sync on green, analog signal.
screensize: 34 27
gamma: 2.200000
dpms: RGB, active off, no suspend, no standby
timing: 720x400@70 Hz (VGA 640x400, IBM)
timing: 720x400@88 Hz (XGA2)
timing: 640x480@60 Hz (VGA)
timing: 640x480@67 Hz (Mac II, Apple)
timing: 640x480@72 Hz (VESA)
timing: 640x480@75 Hz (VESA)
timing: 800x600@60 Hz (VESA)
timing: 800x600@72 Hz (VESA)
timing: 800x600@75 Hz (VESA)
timing: 832x624@75 Hz (Mac II)
timing: 1024x768@87 Hz Interlaced (8514A)
timing: 1024x768@70 Hz (VESA)
timing: 1024x768@75 Hz (VESA)
timing: 1280x1024@75 (VESA)
ctiming: 1280x1024@60
ctiming: 1280x960@60
ctiming: 1152x864@75
ctiming: 1024x768@85
ctiming: 800x600@85
ctiming: 640x480@85
dtiming: 1280x1024@70
monitorserial: QAG063401932
monitorrange: 30-82, 50-85
monitorname: VA703-3Serie




--
Paul Scott
Librarian
Southern Arizona Symphony Orchestra



--
To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx with a subject of "unsubscribe". Trouble? Contact listmaster@xxxxxxxxxxxxxxxx
Archive: http://lists.debian.org/4E0E94B6.1010306@xxxxxxxxxxx

Relevant Pages