System will no poweroff, noisy boot.
I'm running kernel `3.2.0-3-amd64`on Wheezy. I use a ThinkPad T420.
My first problem is that when I request my laptop to shutdown or reboot, it
gets to the final [info] Will now halt. but then just hangs. I sometimes
get messages from other kernel modules such as echi_hcd, sd, hda_intel and
thinkpad_acpi *after* the [info] Will now halt message.
A related problem is horrifically noisy messages from kernel at boot time.
kernel.printk = 4 1 1 7
in /etc/sysctl.conf to no avail
Also tried changing HALT=halt in /etc/default/halt to see if that made any
difference, it didn't.
At a bit of loss here as to what to try next!
- [GIT PULL] exofs fixes for 2.6.33-rc3
... To receive the following two fixes for the 2.6.33 Kernel. ... The first problem was found when integrating pnfs-tree with 2.6.33-rc1 ... Since we needed these types before the pnfs-objects code was ... mark_inode_dirtywhen it extends i_size. ...
- Re: System will no poweroff, noisy boot.
... My first problem is that when I request my laptop to shutdown or reboot, ... A related problem is horrifically noisy messages from kernel at boot time. ... Also reinstalling grub ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ...
- Re: Intel PCI EtherExpress Pro100 @kernel 2.2.26: Too much work at interrupt, status=0xaa55.
... >> The machine just stops responding with any syslog entries. ... > That's probably related to the first problem you describe. ... And changing the kernel is not so easy. ... ditribution and it is not kernel 2.4 ready like woody. ...
- Re: good morning to all
... M> not boot, it show error unable to load a kernel .. ... M> So after the first problem, you reinstalled the system, which worked for ...
- Re: kernel panic on 8.1-rc1 amd64
... I had first problem when I ... another kernel and csuped to releng_8_0 and all was ok again. ... saw rc1 in cvsweb, I gave rc1 a try, and same problem. ...