Re: New NVidia 5336 Drivers Available - 2.6 Kernel Support

From: Marc Schwartz (MSchwartz_at_MedAnalytics.com)
Date: 01/28/04

  • Next message: Clint Harshaw: "Re: New NVidia 5336 Drivers Available - 2.6 Kernel Support"
    To: fedora-list@redhat.com
    Date: Wed, 28 Jan 2004 09:59:44 -0600
    
    

    On Wed, 2004-01-28 at 09:41, Clint Harshaw wrote:
    > Marc Schwartz wrote:
    > > Hi all,
    > >
    > > Just a quick heads up that NVidia has made available new drivers
    > > (version 5336) available, which now include support for the 2.6 kernel.
    > >
    > > I am not running 2.6, however I did install the new drivers this morning
    > > on a Dell i8200 laptop with a 64 Mb 440 Go card. Using the 4496 drivers,
    > > I got around 2000 FPS with glxgears. With 5336, I am getting around 2100
    > > FPS with glxgears.
    > >
    > [...]
    >
    > I've just installed it as well, and it went in just fine without using
    > the CC="gcc32" drill.
    >
    > Am I misunderstanding your frames-per-second though? I looked at the
    > frames-per-second for the gears screensaver, and I'm seeing only around
    > 50 fps. That's on a stock PogoLinux Veronna workstation.
    >
    > Clint

    I think the difference is that you are probably running the gears
    screensaver full screen, whereas the numbers that I gave above are from
    glxgears running from a console, which is not full screen. If I run
    gears full screen, showing the FPS, I am also getting around 50 FPS.

    Here is a sampling of the output during glxgears from a console:

    10226 frames in 5.0 seconds = 2045.200 FPS
    10246 frames in 5.0 seconds = 2049.200 FPS
    10230 frames in 5.0 seconds = 2046.000 FPS
    10220 frames in 5.0 seconds = 2044.000 FPS
    10218 frames in 5.0 seconds = 2043.600 FPS
    10157 frames in 5.0 seconds = 2031.400 FPS
    10187 frames in 5.0 seconds = 2037.400 FPS

    These numbers are about 50 - 75 FPS slower than what I first got after
    starting X, before loading other apps. These numbers are with Evolution
    and gmplayer running.

    BTW, I forgot to mention that I am running the 2.4.22-1.2163.nptl
    kernel.

    HTH,

    Marc

    -- 
    fedora-list mailing list
    fedora-list@redhat.com
    To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
    

  • Next message: Clint Harshaw: "Re: New NVidia 5336 Drivers Available - 2.6 Kernel Support"

    Relevant Pages

    • Re: monitor shuts down
      ... Right now I have the screensaver at 800x600 resolution and my FPS are in the 20's and low 30's and it hasn't shut the monitor off yet, and I leave it one all night long. ... I haven't tried my games so far with this setting just the screensaver and it seems to work well. ... The cheapies overrate their wattage by summing up the volts * amps for each output tap but neglecting to inform you that some share a common rail where the total amps is less when both taps are used. ...
      (microsoft.public.windowsxp.help_and_support)
    • Re: monitor shuts down
      ... computer is still running but I have to reboot to get the monitor on again. ... The screensaver is Watermill 3d screensaver by ... Screensavers, games. ... higher is when I noticed my FPS not so high. ...
      (microsoft.public.windowsxp.help_and_support)
    • Re: New NVidia 5336 Drivers Available - 2.6 Kernel Support
      ... >screensaver full screen, whereas the numbers that I gave above are from ... >glxgears running from a console, ... >gears full screen, showing the FPS, I am also getting around 50 FPS. ...
      (Fedora)
    • Re: New NVidia 5336 Drivers Available - 2.6 Kernel Support
      ... Clint Harshaw wrote: ... >> I am not running 2.6, however I did install the new drivers this morning ... >> FPS with glxgears. ...
      (Fedora)