A small problem with e1000 Net driver.

From: GianPiero Puccioni (gip_at_ino.it)
Date: 04/21/04

  • Next message: Douglas Furlong: "Re: scroll mouse problem"
    Date: Wed, 21 Apr 2004 12:01:41 +0200
    To: fedora-list@redhat.com
    
    

    Hi,

    I have some problems with a machine (Fujitsu dual Xeon) with an on
    board Intel 82540 network card.
    This is what kudzu reports:

    device: eth0
    driver: e1000
    desc: "Intel Corp.|82540EM Gigabit Ethernet Controller"

    The problem is that it takes a long time to start and the mount of some
    NFS directories fails at boot. I tried to "ping" the machine when it
    boots and the first ping I get back is when the login screen is already
    on. If I try a network stop/start it takes 18/20 seconds before the
    network works, even if I get an [OK] almost immediately.

    The machine is connected to a Cisco switch and I thought that the problem
    could be negotiating the speed so I tried to force eth0 to 100M FD with
    "options Speed=100 Duplex=2" in modules.conf but it made it even slower,
    and it gave an error about "Speed, AutoNeg and MDI-X" being
    incompatible(??).
    Only thing I can think is to put a delay in rc.local and mount the NFS
    directory there, but I hope there is a better solution.

    Additional info,"dmesg" has this:

    Intel(R) PRO/1000 Network Driver - version 5.1.13-k1
    Copyright (c) 1999-2003 Intel Corporation.
    divert: allocating divert_blk for eth0
    eth0: Intel(R) PRO/1000 Network Connection
    divert: freeing divert_blk for eth0
    ip_tables: (C) 2000-2002 Netfilter core team
    Intel(R) PRO/1000 Network Driver - version 5.1.13-k1
    Copyright (c) 1999-2003 Intel Corporation.
    divert: allocating divert_blk for eth0
    eth0: Intel(R) PRO/1000 Network Connection
    ip_tables: (C) 2000-2002 Netfilter core team
    e1000: eth0 NIC Link is Up 100 Mbps Full Duplex

    I don't know anything about this "divert_blk" is this a problem?
    And this is only the first time, with a "network restart" only the last
    two lines appear, but the delay is still present.

    Any help?

    Thanks,
      GianPiero

    -- 
    ****************************************************************************
    *  Istituto Nazionale di Ottica Applicata              GianPiero Puccioni  *
    *  Largo E.Fermi 6                            E-Mail :         gip@ino.it  *
    *  I-50125  Firenze - ITALY     Tel +39 055 23081  -  Fax +39 055 2337755  *
    ****************************************************************************
    -- 
    fedora-list mailing list
    fedora-list@redhat.com
    To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
    

  • Next message: Douglas Furlong: "Re: scroll mouse problem"

    Relevant Pages

    • Problems with B44, Wont receive until module reloaded, and ifconfigured by hand
      ... switched to 2.4.22, and its b44 driver. ... But if I am connected to another network, so I have to change the ip, it ... ifconfig eth0 down; rmmod b44; modprobe b44; ...
      (Linux-Kernel)
    • Re: Wireless Card Trouble ipw220
      ... I have a ipw2200 card built in, I have used livna to install the ... IntelPRO/Wireless 2100 Network Driver, ... Detected Intel PRO/Wireless 2100 Network Connection ... ipw2100: eth0: Failed to power on the adapter. ...
      (Fedora)
    • Re: Window 2003 RIS Server w/ Optiplex 755 & Intel 82566DM-2 card
      ... Intel, the only one we could find is the multilanguage. ... after extraction, I've tried Dell support, and a couple other ... network adapter" message, but I'm still stuck on this BSOD: ... Intel released a new driver package in February 2008. ...
      (microsoft.public.windowsxp.setup_deployment)
    • Re: Destination Host Unreachable
      ... The network is in a star configuration with a SonicWall router as the ... eth0: no IPv6 routers present ... # nVidia Corporation MCP55 Ethernet ...
      (comp.os.linux.networking)
    • Re: Samba nmbd messages in log (SOLVED)
      ... network is served off its own NIC (eth0). ... A separate NIC is connected thru cable modem to VOIP router. ... I can see my shares on the network from a Windows XP client. ... netbios name = SAMBA ...
      (Fedora)