Re: 2 SCSI Controllers

From: Götz Reinicke (goetz.reinicke_at_filmakademie.de)
Date: 04/29/04

  • Next message: Michael Mayhew: "Re: SoundBlaster Live! sound card issue..." 
    Date: Thu, 29 Apr 2004 13:49:14 +0200
To: For users of Fedora Core releases <fedora-list@redhat.com>

    Alexander Dalloz schrieb:

    > Am Do, den 29.04.2004 schrieb Götz Reinicke um 12:07:
    >
    >
    >>Hi,
    >>
    >>I have an Dell PE 1650 Server with an internal perc 3/di SCSI RAID
    >>Controller hosting a RAID 1 and an Adaptec 29160 Controller hosting an
    >>external Hardware RAID-Box.
    >>
    >>If I boot, and try to install Fedora, the external RAID is seen as sda,
    >>the internal RAID as sdb.
    >>
    >>How can I change this order, so that the internal RAID is sda and the
    >>external RAID is sdb? Any ideas?
    >>
    >>
    >>Regards
    >>
    >>Götz Reinicke
    >
    >
    > Just change the SCSI ID of the RAID arrays/drives. The lowest is sda,
    > the second... Remembering your previous post about difficulties with an
    > external SCSI driver array of SATA drives I guess you can specify the
    > SCSI ID for the whole external box.

    I do have different IDs, 0 for the internal RAID, 1 for the external
    RAID-Box. The later is attached to a different SCSI Controller.

    But the external Box is seen as sda :-(

    so long...
    ...Götz 

    -- 
Götz Reinicke
IT Koordinator - IT OfficeNet
Tel. +49 (0) 7141 - 969 420
Fax  +49 (0) 7141 - 969 55 420
goetz.reinicke@filmakademie.de
Filmakademie Baden-Württemberg
Mathildenstr. 20
71638 Ludwigsburg
www.filmakademie.de
-- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
  • Next message: Michael Mayhew: "Re: SoundBlaster Live! sound card issue..."

    Relevant Pages

    • RE: Boot loader problem after addiing SCSI disk
      ... Unfortunately the three scsi devices are not identical. ... The old sda and sdb are two internal raided file systems on two 3ware 8 ... port PATA controllers, ...
      (RedHat)
    • FC2 -> F7 via yum
      ... the drive renaming of everything (ATA and SCSI) to sd$ ... hda -> sda ... hdb -> sdb ...
      (Fedora)
    • Re: SCSI disk names change when adding / removing devices.
      ... > with an internal scsi controller my two disks are sda and sdb, ... But then when I add a new scsi card and hook up ... I could label the disks sure but then swap is still ... the second will be sdb. ...
      (Fedora)