Re: Problems getting 2 NICs to work.

From: Kevin Kimmell (kevin_at_dynamictrend.com)
Date: 05/18/04

  • Next message: Vikas Kedia: "Finally got hold of FC2 now how to install it" 
    Date: Tue, 18 May 2004 11:06:39 -0400
To: For users of Fedora Core releases <fedora-list@redhat.com>

    Below are the contents of the config files. And as for how it's
    working... my guess is that it's working because I'm running both of
    those class C's out of the same ethernet interface on the same router.
    All of the switches on my public network share the traffic of both
    ranges. Therefor that same eth port on the linux box is plugged in to a
    switch that has direct access to both ranges.

    [root@dtweb02 network-scripts]# cat ifcfg-eth0
    # Please read /usr/share/doc/initscripts-*/sysconfig.txt
    # for the documentation of these parameters.
    ONBOOT=yes
    USERCTL=no
    PEERDNS=no
    TYPE=Ethernet
    IPADDR=12.168.88.12
    DEVICE=eth0
    HWADDR=00:0E:7F:37:5B:53
    BOOTPROTO=none
    NETMASK=255.255.255.0

    [root@dtweb02 network-scripts]# cat ifcfg-eth01
    # Please read /usr/share/doc/initscripts-*/sysconfig.txt
    # for the documentation of these parameters.
    ONBOOT=yes
    USERCTL=no
    PEERDNS=no
    TYPE=Ethernet
    IPADDR=204.117.218.12
    DEVICE=eth0
    HWADDR=00:0C:72:30:52:53
    BOOTPROTO=none
    NETMASK=255.255.255.0

    ++ Kevin Kimmell + kevin_AT_dynamictrend.com + Dynamic Trend, Inc. ++

    Alexander Dalloz wrote:

    >>[root@dtweb02 sysconfig]# ip address list
    >>1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
    >> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    >> inet 127.0.0.1/8 scope host lo
    >>4: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    >> link/ether 00:0e:7f:30:52:53 brd ff:ff:ff:ff:ff:ff
    >> inet 12.168.88.12/24 brd 12.168.88.255 scope global eth0
    >> inet 204.117.218.12/24 brd 204.117.218.255 scope global eth0
    >>5: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    >> link/ether 00:0e:7f:30:52:52 brd ff:ff:ff:ff:ff:ff
    >>
    >>
    >
    >eth1 is not used anyway as it has no IP. Both IPs are assigned to eth0.
    >Curious that those different nets can be bound to one physical device.
    >Can someone shed any light on this?
    >
    >
    >
    >>And I couldn't get that last command to run. I tried ifcfg-ethX and
    >>ifcfg-eth0 and ifcfg-eth01 but all commands were not found. Perhaps
    >>they're not in the path?
    >>
    >>
    >
    >Sorry, misunderstanding: I asked for the contents of
    >/etc/sysconfig/network-scripts/ifcfg-eth0 and
    >/etc/sysconfig/network-scripts/ifcfg-eth1, to see how you configured
    >both ethernet devices. Additional, what does "ifconfig -a" report?
    >
    >Alexander
    >
    >
    >
    > 

    -- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
  • Next message: Vikas Kedia: "Finally got hold of FC2 now how to install it"

    Relevant Pages

    • Catalyst 1900 console access
      ... I looked at the Cisco Password Recovery Procedure for the Cisco ... I get nothing out the console port. ... documentation, computers (and switches) don't read documentation. ...
      (comp.dcom.sys.cisco)
    • Re: Bonding does not work on a switch?
      ... Sourceforge Bugtracker of the Bonding module, because the documentation ... > use multiple switches, you need to configure something like ISL, ... Meinberg radio clocks: 25 years of accurate time worldwide ...
      (comp.os.linux.networking)
    • Re: How to search for nearest nonblank cell in previous rows?
      ... search (at least for small ranges), it only has to look at the nearest ... undocumented behavior -- worse, behavior that seems contrary to MS ... documentation -- does not make it right, ... such a way that this usage fails in the future. ...
      (microsoft.public.excel.misc)
    • Re: Running out of DHCP address leases howto rectify?
      ... ranges for servers, printers, switches etc ... If I have 10 procurve switches, a couple for each floor, whats the ... How many floors do you have? ...
      (microsoft.public.windows.server.general)
    • Re: MS05-038 Silent Unattended Installation
      ... The patch the file it downloads is ... >> documentation for the patch to find the switches I need. ...
      (microsoft.public.sms.swdist)