Re: SiS5513 & 2.4.22-1.2115.nptl
From: Daniel (danielp_at_infolink.com.br)
Date: 06/11/04
- Previous message: Max K-A: "Re: Unofficial Fedora FAQ Update: 31 May 2004"
- In reply to: Mark Susol|Ultimate Creative Media: "SiS5513 & 2.4.22-1.2115.nptl"
- Next in thread: Alexander Dalloz: "Re: SiS5513 & 2.4.22-1.2115.nptl"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Fri, 11 Jun 2004 04:22:48 -0300 To: For users of Fedora Core releases <fedora-list@redhat.com>
Hi Mark,
try passing to the kernel during boot
ide=nodma
(may be ide1=nodma or ide2=nodma see if this is valid)
These are paramters to the installation program (that doesn't work
during installation) but they may function to the kernel (who knows?
this may be your luck day. Okay, this is just a try, forget abou it if
it doesn't work)
Daniel
Mark Susol|Ultimate Creative Media wrote:
>I'm having difficulties keeping a server running under FC1 with a SiS5515
>chipset and 2.4.22-1.2115.nptl kerenl from FC1 distro CDs. The main problem
>is with my secondary drive giving me errors like:
>
>hdb: dma_timer_expiry: dma status == 0x41
>dma_timer_expiry: dma status == 0x40
>hdb: timeout waiting for DMA
>hdb: timeout waiting for DMA
>hdb: (__ide_dma_test_irq) called while not waiting
>hda: lost interrupt
>last message repeated 6 times
>hdb: irq timeout: status=0xd0 { Busy }
>ide0: reset: success
>
>
>Which then under peak usage just hangs the server and eventually only a hard
>boot will bring it around.
>
>I've already had to replace one HD for I/O bad sector errors, and now I
>can't seem to keep this HD going either. I'm trying to run with DMA off but
>it keeps getting reset by the kernel. This seems like a software problem as
>in FC and the chipset and IDE controller.
>
>
>http://www.cs.helsinki.fi/linux/linux-kernel/2001-00/0473.html
>
>The sis5513 driver deliberatly overrides the CONFIG_IDEDMA_AUTO and
> the BIOS settings that might disable UDMA and forces UDMA which works
> for a while then fails, attempts to fallback to a non-DMA mode and
> fails that as well.
>
>
>>From my dmseg file:
>
>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SIS5513: IDE controller at PCI slot 00:02.5
>SIS5513: chipset revision 0
>SIS5513: not 100% native mode: will probe irqs later
>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
>
>
>
>Any ideas?
>
>Mark Susol
>
>
>
>
-- fedora-list mailing list fedora-list@redhat.com To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
- Previous message: Max K-A: "Re: Unofficial Fedora FAQ Update: 31 May 2004"
- In reply to: Mark Susol|Ultimate Creative Media: "SiS5513 & 2.4.22-1.2115.nptl"
- Next in thread: Alexander Dalloz: "Re: SiS5513 & 2.4.22-1.2115.nptl"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
