Atapi CD-RW problem (ide-scsi)

From: Kristian André Gallis (kagallis_at_online.no)
Date: 08/29/04

  • Next message: Matthew Saltzman: "Re: Shell prompt" 
    Date: Sun, 29 Aug 2004 17:16:03 +0200
To: fedora-list@redhat.com

    Hello!

    I run Fedora 2 on a Fujitsu Siemens Amilo A7620 laptop, and have
    suddenly got myself into trouble that I cannot find a solution to on the
    web.

    I was going to burn my first CD with cdrecord on Fedora 2. But that
    didn't work. I had a problem when I used Fedora 1 aswell, but then I
    just followed a how-to in the Red Hat Linux Fedora bible to configure
    the IDE CD-ROM for recording.

    Then I got into trouble, because this how-to is for kernel 2.4 and I
    have 2.6.8. I didn't think of this and just tried to follow it step by
    step. The result was that cdrecord does still not work, and now _I'm not
    able to read CDs anymore!_

    The things I have done (run) is:

    [root@localhost /]# modprobe -a ide-scsi
    [root@localhost dev]# rm cdrom
    [root@localhost dev]# ln -s scd0 cdrom

    How can I revert to the original configuration? So I at least am able to
    read CDs?

    Information:
    [root@localhost /]# dmesg | grep ^hd
    hda: FUJITSU MHS2040AT, ATA DISK drive
    hdc: Slimtype COMBO LSC-24081, ATAPI CD/DVD-ROM drive
    hda: max request size: 128KiB
    hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
    hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
    hdc: packet command error: error=0x54

    [root@localhost /]# cdrecord -scanbus
    Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004
    Jörg Schilling
    Note: This version is an unofficial (modified) version with DVD support
    Note: and therefore may have bugs that are not present in the original.
    Note: Please send bug reports or support requests to
    <warly@mandrakesoft.com>.
    Note: The author of cdrecord should not be bothered with problems in
    this version.
    scsidev: 'ATA'
    devname: 'ATA'
    scsibus: -2 target: -2 lun: -2
    Warning: Using badly designed ATAPI via /dev/hd* interface.
    Linux sg driver version: 3.5.27
    Using libscg version 'schily-0.8'.
    cdrecord: Warning: using inofficial libscg transport code version
    (schily - Red Hat-scsi-linux-sg.c-1.80-RH '@(#)scsi-linux-sg.c 1.80
    04/03/08 Copyright 1997 J. Schilling').
    scsibus1:
             1,0,0 100) 'Slimtype' 'COMBO LSC-24081 ' '3MU4' Removable CD-ROM
             1,1,0 101) *
             1,2,0 102) *
             1,3,0 103) *
             1,4,0 104) *
             1,5,0 105) *
             1,6,0 106) *
             1,7,0 107) *

    Thanks for any help.

    Kristian André 

    -- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
  • Next message: Matthew Saltzman: "Re: Shell prompt"

    Relevant Pages

    • Re: Best guide for Fedora 9 ever !
      ... this guide is the best guide for Fedora 9! ... Just a clarification, I cdrecord is not installed on FC9 at all, rather there is a program called "wodim" which is linked to cdrecord. ... By any name the kernel filters commands send to the burner which prevents certain commands from being sent unless you are root, particularly commands specific to a particular vendor. ...
      (Fedora)
    • Re: Best guide for Fedora 9 ever !
      ... this guide is the best guide for Fedora 9! ... Probably most of your question about Fedora 9 are ... I cdrecord is not installed on ... By any name the kernel filters commands send to the ...
      (Fedora)
    • Re: setuid cdrecord vs. wodim
      ... this guide is the best guide for Fedora 9! ... Just a clarification, I cdrecord is not installed on FC9 at all, rather there is a program called "wodim" which is linked to cdrecord. ... By any name the kernel filters commands send to the burner which prevents certain commands from being sent unless you are root, particularly commands specific to a particular vendor. ...
      (Fedora)
    • Re: Atapi CD-RW problem (ide-scsi)
      ... On Sun, 2004-08-29 at 11:16, Kristian André Gallis wrote: ... I had a problem when I used Fedora 1 aswell, ... > Then I got into trouble, because this how-to is for kernel 2.4 and I ... The result was that cdrecord does still not work, ...
      (Fedora)
    • cdrecord does not work under Fedora 1 and kernel 2.6.2-1.180
      ... I am running Fedora Core Release 1 with the 2.6.2-1.180 kernel. ... Cdrecord-Clone 2.01a19 is the version of cdrecord that I have. ... Warning: The related libscg interface code is in pre alpha. ...
      (Fedora)