Re: USB keyx with FC2....

ysdg_at_free.fr
Date: 09/08/04

  • Next message: usmany_at_excite.com: "Linux Firewall on FC1" 
    Date: Wed,  8 Sep 2004 10:27:00 +0200
To: For users of Fedora Core releases <fedora-list@redhat.com>

    thx for your time Alexander.
    I had already done "tail -f /var/log/messages" before posting this request :
    nothing appears when plugging or unplugging the usb key. Even if I reboot the
    problem remains (the only error detection is : "modprobe: FATAL: Error running
    install command for sound_slot_1" ; hence nothing concerning usbdevice)
    My kernel is 2.6.8-1.521 ; I read a guy having the same problem with the same
    motherboard ASUS P4P800 recompile his kernel to make it works.... As I've never
    done it, I'm bit reluctant...
    Do you still have wise advice to give me ?
    THX

    Selon Alexander Dalloz <alexander.dalloz@uni-bielefeld.de>:

    > Am Di, den 07.09.2004 schrieb ysdg@free.fr um 19:22:
    >
    > > I know this topic must have been treated many times but here is my problem
    > :
    >
    > This is no real excuse. If you dig the list archive you will find enough
    > discussions about usage of USB sticks on FC1/2. And you'll find hints to
    > debug things if it does not work like expected.
    >
    > > I just installed FC2 (though I had some problems with my ASUS motherboard)
    > and
    > > updated everything. With FC1, I was used to mount my usbkeys with the
    > following
    > > command :
    > > mount -t vfat /dev/sda1 /mnt/removable
    >
    > The partition hasn't hardly changed. So it will still be sda1.
    >
    > > It doesn't work anymore... I used many other mounting point such as sda
    > sda2
    > > sda3... sdb sdb1 ... but nothing worked.
    >
    > Blind trials make not much sense.
    >
    > > I launched the hardware browser to see the mounting point of my usbkey and
    > > here... NOTHING ! It doesn't appear .....
    >
    > Take the stick out. Run a terminal with "tail -f /var/log/messages" and
    > observe the syslog when plugging in the USB stick. There must come up
    > some messages. "fdisk -l" should show you the drive and it's
    > partition(s). If you tricked already too much and messages output keeps
    > emptry when plugging and unplugging then do a reboot - with stick not
    > connected. Retry with syslog observation.
    >
    > > HAVE A CLUE ?
    >
    > No reason to shout out.
    >
    > Alexander
    >
    >
    > --
    > Alexander Dalloz | Enger, Germany | GPG key 1024D/ED695653 1999-07-13
    > Fedora GNU/Linux Core 2 (Tettnang) kernel 2.6.8-1.521smp
    > Serendipity 19:28:32 up 8 days, 16:45, load average: 0.28, 0.34, 0.35
    > 

    -- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
  • Next message: usmany_at_excite.com: "Linux Firewall on FC1"

    Relevant Pages

    • psm (pr kern/59067) and irq 16 rate, some observations
      ... It's clear that I am seeing the same out of control irq16 that some ... With no usb devices, the usb kernel ... After rebooting I tried the trackball on usb again, ... along with my keyboard, so I had to ssh in, rebuild the kernel, and reboot. ...
      (freebsd-current)
    • Re: modularized kernels
      ... I don't usually compile modules I don't plan to use. ... Linux, being a monolithic kernel, if any "subsystem" is in a serious state ... the only action I would trust is a reboot. ... I have encountered a USB controller problem a couple times on my Linux ...
      (comp.os.linux.development.system)
    • Re: WM6 Activesync with Exchange Server "Waiting for Network" problem
      ... Cisco ASA5505 Firewall configured to allow SSL to Exchange Server ... If I reboot my phone with the USB cable connected, I can use USB but not ... If I reboot my phone and use OTA sync, I cannot use USB until I reboot ...
      (microsoft.public.pocketpc.activesync)
    • USB install for HP49G+/HP50 on Win98 system
      ... had the problem that I would have to reboot the computer each time I ... I went to c:\Program Files\Hewlett-Packard\conn4x folder and looked ... the calc under my USB. ... quite right about this USB install for Windows. ...
      (comp.sys.hp48)
    • Re: XP wont boot past posts
      ... with usb on reboot, periodically. ... I looked up post code 50 and it said it is ... >> Dave, did you double check all connections and Processor, Ram etc ... >>> Afterwards it asked for a reboot, ...
      (microsoft.public.windowsxp.general)