16x9 aspect ratio display

From: Bill Gradwohl (bill_at_ycc.com)
Date: 10/31/04

  • Next message: ne...: "Re: Two 3Com ethernet NIC : don't work" 
    Date: Sun, 31 Oct 2004 09:36:32 -0600
To: Fedora List <fedora-list@redhat.com>

    Is anyone using a 19" or larger 16x9 aspect ratio LCD on FC2 (or FC3tX)
    running Gnome as the GUI? If so, I'd like to know what brand/model of
    LCD and video board you're using and if you like it. Any glitches during
    installation or usage?

    Initially, I want to use the wider screen format for writing C code via
    emacs. More info per eye full.
    Eventually, I'd like to add a TV card and get HDTV thru the setup since
    one of my TV's just died.

    Hints? 

    -- 
Bill Gradwohl
bill@ycc.com
http://www.ycc.com
spamSTOMPER Protected email
-- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
  • Next message: ne...: "Re: Two 3Com ethernet NIC : don't work"

    Relevant Pages

    • Do power supplies in shut down come on briefly?
      ... or the video board on an LCD TV. ... found the 5 volts stand by voltage was working fine, ... briefly come up if something on the video board is causing my power ... output rail from the power supply to see if they start to try to come ...
      (sci.electronics.repair)
    • power the LCD board with a computer ATX power???
      ... I have a lcd monitor with bad internal power supply. ... is responsible for 12V to the video board. ... video board and turn on the LCD and verify the condition of video ...
      (sci.electronics.repair)
    • repair a viewsonic lcd monitor that keep on/off
      ... I just received a 17 inches viewsonic lcd from my friend ... If the internal power have no load(not connected to video board), ... All of the diodes have passed the diode test on the multimeter. ...
      (sci.electronics.repair)
    • Re: power the LCD board with a computer ATX power???
      ... is responsible for 12V to the video board. ... 11.56- 12.45V and causes the LCD to shut down and restart every 0.5 ... Can i use a computer PC ATX power supply 12V to power the ... but that voltage range you're seeing shouldn't be a problem. ...
      (sci.electronics.repair)