Re: 16x9 aspect ratio display

From: Bill Gradwohl (bill_at_ycc.com)
Date: 10/31/04

  • Next message: Scot L. Harris: "Re: How about the support of FC for laptop?"
    Date: Sun, 31 Oct 2004 12:03:12 -0600
    To: For users of Fedora Core releases <fedora-list@redhat.com>
    
    

    Jim Higson wrote:

    >I very much doubt the brand or model of monitor will make any difference at
    >all. Afterall, it just recieves a picture and neither knows nor cares if it
    >comes from Windows/Linux or anything else.
    >
    >I just put GNOME into a 16:9 resolution wihtout any problems. Since the
    >computer doesn't need to know the physical side of the monitor It's a good
    >bet that so long as the panel doesn't do anything REALLY stupid (like violate
    >the DVI spec) you won't have any problems.
    >
    >
    After reading about all the nvidia problems, I'm just trying to find a
    board/display that works. I'm not certain that DVI is the way to go or not.

        In theory, there is no difference between theory and practice. But,
    in practice, there is.
        Jan L. A. van de Snepscheut

    In theory you're right, but in practice, it makes a difference. Some
    displays are better than others, or else there would only be one
    manufacturer. www.tomshardware.com provides some input, but they are
    Windows centric. O/S's these days try to get the make and model of the
    display from the hardware itself to help configure the video system. My
    current old 20" monitor is too stupid to supply such data. I'd like to
    find one that both Windows and Linux can recognize.

    >>Initially, I want to use the wider screen format for writing C code via
    >>emacs. More info per eye full.
    >>
    >>
    >
    >Really?
    >
    >Most 16:9 monitors I see are lower resolution versions of the more square
    >equivalent. For example, I have a 5:4 19inch TFT which runs at 1280x1024. The
    >16:9 version is more expensive but uses 1280x720 - about 30% less pixels.
    >
    >At a given diagonal size the area of a 16:9 screen will also be less, although
    >wider. A 19inch 5:4er is 14.8x11.9, or 176 sq inches, whereas a 16:9er is
    >16.6x9.2, or 107 sq inches. So about 40% less area.
    >
    >
    >
    This is personal preference more than anything else, and I may end up
    not liking the wider format. I've not tried it yet. :-) That's why I'm
    asking for input from folks who have already made the leap.

    Although I agree with your arithmetic, metaphorically speaking you
    advocate purchasing a Ferrari because it has more horsepower than the
    SUV. I want to try an SUV.

    I run my 20" at 1024x768. If I were 20 years old; said another way, if I
    were 35 years younger, I'd probably crank up the resolution, but its
    just not comfortable for me. I find I always want the width more than
    the height. A piece of information is usually listed horizontally, not
    vertically. I'd like to read the log lines in one eye full as opposed to
    scrolling right for example.

    I'd also like to stop my self imposed practice of writing code \
    limiting each line to around 80 columns. That's from my 026 \
    keypunch days on a mainframe. With a wider screen, its more\
    likely I'll use the width to put an entire thought on one line as \
    opposed to doing line continuations because theres a better chance \
    that the line will hold the entire thought. i.e long if statements, etc.

    Like it or not, HDTV format will take over in my opinion. I've already
    seen some laptops, Toshiba I believe, and they're georgeous, except they
    still use those miserable tiny keyboards (lots of empty space left and
    right of the keys - what's the point of that). Since one of my TVs quit,
    and my 1995 vintage 20" heats the room I'm in (literally), I figured its
    time to lower my electric bill, get rid of the radiation, and get a more
    modern form factor all at the same time. I'm just not sure what to get.

    -- 
    Bill Gradwohl
    bill@ycc.com
    http://www.ycc.com
    spamSTOMPER Protected email
    -- 
    fedora-list mailing list
    fedora-list@redhat.com
    To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
    

  • Next message: Scot L. Harris: "Re: How about the support of FC for laptop?"

    Relevant Pages

    • Re: Screen Resolution
      ... I decided to change the monitor resolution to make reading a little easier and did thid Control Panel/Display. ... Pres the F8 function key while windows is booting and select safe mode. ... Use the advanced display properties dialog to change the vertical resolution for the dersired resolution to a lower value. ...
      (microsoft.public.windowsxp.basics)
    • Re: Bad quality in Live and Recorded TV...
      ... Windows Vista Home Premium ... I'm using a VGA connector from the PC to the monitor because that's whats ... Whatever the default is for Vista ... way at all to get MC to dynamically adjust the output resolution? ...
      (microsoft.public.windows.mediacenter)
    • Re: Monitor HookUp Problems
      ... the 8100 is trying to run the old 14" monitor outside of its ... Set the graphics to the minimum resolution; ... > It may be possible to install a .inf file for the monitor, so that Windows ... >> new computer is a Dell Dimension 3000, ...
      (comp.sys.ibm.pc.hardware.video)
    • Re: ok I have two problems, one i have already aske for help with but.
      ... > play auto detect and auto use of pnp monitors. ... > nicely because somehow i got windows to stop using pnp. ... > go to anything higher than 1300x something my monitor err windows xp displays ... > the higher up resolution as a blown up image which almost makes windows xp ...
      (microsoft.public.windowsxp.help_and_support)
    • Re: screen goes blank after windows bootup logo...
      ... The screen is going blank because the video adapter is set to a refresh rate/resolution which the ... monitor cannot handle. ... Let windows boot normally (although ... Hit the left arrow key several times and press ENTER (this will decrease the resolution and apply ...
      (microsoft.public.windowsxp.general)