RE: Extreme help needed with installation of FC2 on a Dell Inspiron 8600

From: Mathew S. Nowend (mathewnowend_at_swfla.rr.com)
Date: 11/10/04

  • Next message: David Cary Hart: "Re: NVIDIA Again"
    To: "'For users of Fedora Core releases'" <fedora-list@redhat.com>
    Date: Wed, 10 Nov 2004 17:39:41 -0500
    
    

    I re installed FC3 tonight and let the eth0 hang or take a long time. I
    should have mentioned that the network card is plugged into my cable modem.
    I did let it hang for over 1 1/2 hours and the machine still completely
    locks up to the point that I have to power down the system and reboot. Any
    further help would greatly be apprectiated.

    Thanks

    Mathew S. Nowend

    -----Original Message-----
    From: fedora-list-bounces@redhat.com [mailto:fedora-list-bounces@redhat.com]
    On Behalf Of J. Matthew Price
    Sent: Wednesday, November 10, 2004 12:26 PM
    To: For users of Fedora Core releases
    Subject: Re: Extreme help needed with installation of FC2 on a Dell Inspiron
    8600

    The eth0 will hang or at least take a long time if the network
    connection cannot be resolved, make sure that you plug in the cable to
    speed up startup.

    If you don't have a network connection, the service should time-out.

    J. Matthew Price
    pricejm@musc.edu

    Mathew S. Nowend wrote:
    > ------------------------------------------------------------------------
    >
    > Tonight I installed FC2 on my Dell Inspiron 8600 laptop. It installed
    > fine with no errors. When it was finished it asked to reboot. So I did.
    > It then asked about forcing a file system and the first time I said no
    > and the machine locked at swap file. The second time I forced the file
    > system and it passed the swap file error and gave this message modprobe:
    > Fatal Error: Error inserting floppy
    > c/lib/modules/2.6.5-1.358/kernel/drivers/block/floppy.ko:No such device
    >
    > Could somebody help please I am lost here? My floppy is modular on my
    > laptop and I put it in the bay and it still gave me the error. My floppy
    > can also be connected through a usb externally.
    >
    > I also tried installing FC3 and it did not give me the floppy error but
    > instead it got to the part where it checked eth0 and then it hung there.
    >
    > Quick overview of my laptop is a Pentium M 1.8ghz, 2 gigs of Ram, 60 gig
    > hd, broadcom nic, broadcom 56k, nvidia geforce fx go5200 64 meg video,
    > cdrw/dvd/combo max screen resolution 1920x1200 with a vertical
    > syncronization of 60 hz and horizontal syncronization of 31.5-90khz. I
    > hope that covers everything.
    >
    > Thanks
    >
    > Mathew Scott
    >
    >
    >

    -- 
    fedora-list mailing list
    fedora-list@redhat.com
    To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
    -- 
    fedora-list mailing list
    fedora-list@redhat.com
    To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
    

  • Next message: David Cary Hart: "Re: NVIDIA Again"

    Relevant Pages

    • Re: Destination Host Unreachable
      ... The network is in a star configuration with a SonicWall router as the ... eth0: no IPv6 routers present ... # nVidia Corporation MCP55 Ethernet ...
      (comp.os.linux.networking)
    • PROBLEM: Network hang: "eth0: Tx timed out (f0080), is buffer full?"
      ... We had to reboot a server twice after a network card hang. ... The last minutes previous to the network hang and system hard reset ... Dec 8 10:43:25 urutu kernel: NETDEV WATCHDOG: eth0: transmit timed out ...
      (Linux-Kernel)
    • Re: Samba nmbd messages in log (SOLVED)
      ... network is served off its own NIC (eth0). ... A separate NIC is connected thru cable modem to VOIP router. ... I can see my shares on the network from a Windows XP client. ... netbios name = SAMBA ...
      (Fedora)
    • Re: no network connection
      ... > # The loopback network interface ... > iface eth0 inet dhcp ... I commented out the "auto eth0" line and rebooted. ... 'man ifconfig' to see how to check the status of your interfaces. ...
      (Debian-User)
    • Re: [opensuse] VirtualBox bridged connection in OpenSuse 10.3
      ... eth0 is connected with a wire to ADSL-modem, ... network (so I could ping it from my host suse, ... Shutting down network interfaces: ... br0 Ports: ...
      (SuSE)