Re: Core 3 issues

From: John aka. Rblprd (rblprd.list_at_gmail.com)
Date: 11/13/04

  • Next message: david walcroft: "Re: Streamtuner" 
    Date: Sat, 13 Nov 2004 16:26:31 -0600
To: For users of Fedora Core releases <fedora-list@redhat.com>

    On Sat, 13 Nov 2004 16:15:01 -0600, John aka. Rblprd
    <rblprd.list@gmail.com> wrote:
    > I got in to the Rescue boot, got everything upgraded
    > still I have the boot hang on netwrok after it starts it initializing
    > hardware run
    > storage I guess is fine
    > or is it looking for a storage network???
    >
    > This is Right after I see
    > Welcome to Fedora Core
    > Press 'I' to enter interactive startup.
    > Starting udev: [ OK ]
    > Initializing hardware storage network
    >
    > then blinking cursor
    >
    > please someone help :(
    >
    >
    >
    >
    > On Sat, 13 Nov 2004 00:50:58 -0600, John aka. Rblprd
    > <rblprd.list@gmail.com> wrote:
    > > I haven't installed Core 3 on my toshiba laptop yet
    > > still trying to get it working on one of my desktops
    > > I have Core 2 on my Toshiba 1805-S207
    > > runs great, the wifi is giving me fits right now :/
    > > that is a different story thou
    > >
    > > 8 installs in Core 3 on my desktop and I have yet to have one that
    > > boots and works
    > > in init 5 I can log in but can't really do anything, no write access
    > >
    > > On Fri, 12 Nov 2004 23:21:05 -0600, Santiago Erquicia
    > >
    > >
    > > >
    > > > Do you have a Toshiba laptop?
    > > >
    > > > I have the same problem. In my case is when mounting the filesystem.
    > > > It stall there for 20 seconds.
    > > >
    > > > I was using Ubuntu and when I upgraded my kernel to 2.6.9 it started.
    > > > Booting with the 2.6.8 kernel works perfectly.
    > > >
    > > > Under Ubuntu the error it showed was:
    > > > ERROR: Removing 'cmd64x': Device or resource busy
    > > > and a few others.
    > > >
    > > > Any idea?
    >

    I have removed the "rhgb quiet" boot parameter
    finally showed a difference

    now I get Starting udev
    Loading jbd.ko module
    Loading ext3.ko module
    Creating root device
    Mounting root filesystem
    mount: error 6 mounting ext3
    mount: error 2 mounting none
    Switching to new root
    switchroot: mount failed 22
    umount /initrd/dev faild: 2
    Kernel panic - not syncing: Attemoted to kill init! 

    -- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
  • Next message: david walcroft: "Re: Streamtuner"

    Relevant Pages

    • T3 Storage array issue (reboot loop)
      ... It just dropped off the server it is connected to and now will not boot. ... When attempting to boot it cycles in an infinite loop. ... Initializing System Drivers... ... Detected 10 FC-AL ports on loop 1 ...
      (SunManagers)
    • Re: Samba mount from /etc/fstab fails at boot
      ... > time, though, you don't want to mount networked filesystems at boot. ... Mounting SMB filesystems doesn't depend on any service; ...
      (comp.os.linux.misc)
    • Re: DS-10 boot problem - "HWRPB is invalid"
      ... initializing page table at ff4e000 ... jumping to bootstrap code ... boot the disk via conevrsational bootstrap, and makeing the system standalone at SYSBOOT time: ... SYSBOOT> set WRITESYSPARAMS 0 ...
      (comp.os.vms)
    • Re: Digital Personal workstation 600au
      ... Initializing page table at 1CA000 ... Initializing machine state ... Jumping to bootstrap code ... >WHen put the 7.3.-2 CD into the machine and boot with the command ...
      (comp.os.vms)
    • Re: Trouble installing VMS AXP Hobbyist on a PWS 600au
      ... This CDROM will not boot VMS...at least not easily, ... !initializing page table at 1ca000 ... !setting affinity to the primary CPU ... !jumping to bootstrap code ...
      (comp.os.vms)