FC3: ISDN loading failure

From: antonio montagnani (anto.montagnani_at_virgilio.it)
Date: 11/30/04

  • Next message: Guy Fraser: "What happened to gqview"
    Date: Tue, 30 Nov 2004 18:20:16 +0100
    To: For users of Fedora Core releases <fedora-list@redhat.com>
    
    

    I upgraded from FC2 to FC3, everything is o.k with the exception of the
    ISDN card.
    During the start up I see the Failure red mark during loading of the
    ADSL system (that was working on FC2):
    The card is recognized as from the output of sbin/lspci

    00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
    (rev 02 )
    00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
    (rev 02)
    00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
    00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
    00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
    00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
    00:0f.0 Multimedia video controller: 3Dfx Interactive, Inc. Voodoo 2
    (rev 02)
    00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
    00:11.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
    00:12.0 Network controller: AVM Audiovisuelles MKTG & Computer System
    GmbH A1 IS DN [Fritz] (rev 02)
    01:00.0 VGA compatible controller: S3 Inc. 86c368 [Trio 3D/2X] (rev 02)
    [antonio@Fedora ~]$

     From the kernel start-up log I see:

    ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
    HiSax: Linux Driver for passive ISDN cards
    HiSax: Version 3.5 (module)
    HiSax: Layer1 Revision 2.46.2.5
    HiSax: Layer2 Revision 2.30.2.4
    HiSax: TeiMgr Revision 2.20.2.3
    HiSax: Layer3 Revision 2.22.2.3
    HiSax: LinkLayer Revision 2.59.2.4
    pnp: Device 00:01.00 activated.
    pnp: Device 00:01.01 activated.

    This is my modprobe.conf:

    # Note: for use under 2.4, changes must also be made to modules.conf!
    alias eth0 ne2k-pci
    alias eth1 ne2k-pci
    #alias eth2 hisax
    #alias snd-card-0 sb
    alias usb-controller uhci-hcd
    options scanner vendor=0x04b8 product=0x010b
    #install sound-slot-0 /sbin/modprobe --first-time --ignore-install sound-slot-0 && { /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :; }
    #remove sound-slot-0 { /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :; } ; /sbin/modprobe -r --first-time --ignore-remove sound-slot-0
    alias snd-card-0 snd-sb16
    install snd-sb16 /sbin/modprobe --ignore-install snd-sb16 && /usr/sbin/alsactl restore >/dev/null 2>&1 || :
    remove snd-sb16 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-sb16--

    and this is my /etc/modules.conf

    alias eth0 ne2k-pci
    alias eth1 ne2k-pci
    alias eth2 hisax
    alias sound-slot-0 sb
    post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
    pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
    alias usb-controller usb-uhci
    options scanner vendor=0x04b8 product=0x010b
    # Note: for use under 2.6, changes must also be made to modprobe.conf!

    and the output of my lsmod is:
    Module Size Used by
    parport_pc 24705 1
    lp 11565 0
    parport 41737 2 parport_pc,lp
    autofs4 24005 0
    i2c_dev 10433 0
    i2c_core 22081 1 i2c_dev
    sunrpc 160421 1
    ppp_synctty 10433 0
    ppp_async 11585 1
    crc_ccitt 2113 1 ppp_async
    ppp_generic 35669 6 ppp_synctty,ppp_async
    slhc 7105 1 ppp_generic
    ipt_MASQUERADE 3521 1
    iptable_nat 23045 2 ipt_MASQUERADE
    iptable_mangle 2753 0
    ipt_state 1857 2
    ip_conntrack 40693 3 ipt_MASQUERADE,iptable_nat,ipt_state
    iptable_filter 2753 1
    ip_tables 16193 5 ipt_MASQUERADE,iptable_nat,iptable_mangle,ipt_state,iptable_filter
    microcode 6497 0
    vfat 14785 1
    fat 45409 1 vfat
    dm_mod 54741 0
    md5 4033 1
    ipv6 232705 24
    uhci_hcd 31449 0
    ns558 5441 0
    gameport 4801 1 ns558
    snd_sb16 12717 3
    snd_opl3_lib 11201 1 snd_sb16
    snd_sb16_dsp 14913 1 snd_sb16
    snd_pcm_oss 47608 1
    snd_mixer_oss 17217 2 snd_pcm_oss
    snd_pcm 97993 2 snd_sb16_dsp,snd_pcm_oss
    snd_timer 29765 2 snd_opl3_lib,snd_pcm
    snd_page_alloc 9673 1 snd_pcm
    snd_sb16_csp 23233 1 snd_sb16
    snd_sb_common 18369 3 snd_sb16,snd_sb16_dsp,snd_sb16_csp
    snd_hwdep 9413 2 snd_opl3_lib,snd_sb16_csp
    snd_mpu401_uart 8769 1 snd_sb16
    snd_rawmidi 26725 1 snd_mpu401_uart
    snd_seq_device 8137 2 snd_opl3_lib,snd_rawmidi
    snd 54053 15 snd_sb16,snd_opl3_lib,snd_sb16_dsp,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_sb16_csp,snd_sb_common,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device
    soundcore 9889 3 snd
    ne2k_pci 8865 0
    8390 11841 1 ne2k_pci
    floppy 58609 0
    ext3 116809 2
    jbd 74969 1 ext3

    I do not see any ISDN module??? what does it mean and how to solve it???

    What shall I investigate further??

    Tnx

     Antonio M.

     ===================================================================
     Working with Mozilla Thunderbird 0.9 on Redhat Linux Fedora Core 3
     ===================================================================
     ===================================================================
         Uso Mozilla Thunderbird 0.9 su Redhat Linux Fedora Core 3
                    www.montagnani.org
     ===================================================================

    -- 
    fedora-list mailing list
    fedora-list@redhat.com
    To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
    

  • Next message: Guy Fraser: "What happened to gqview"

    Relevant Pages

    • Re: no ethxx device
      ... Below is the output of lspci -v for the 3 ethernet cards, ... alias eth2 tulip ... 00:0b.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX ... alias pentaval0 pentaval ...
      (comp.os.linux.networking)
    • Re: AVM Fritz ISDN Card Problem
      ... AVM Fritz ISDN Card Problem ... That is the sense of using modprobe. ... Sep 11 06:48:15 Vigor11 kernel: HiSax: Linux Driver for passive ISDN cards ...
      (Fedora)
    • Re: FC3: ISDN loading failure
      ... With the hisax module, the ... What does the ISDN card has to do with ADSL? ... So the hisax module was loaded and the ISDN card initialized. ... legal statement: http://www.uni-x.org/legal.html Fedora GNU/Linux Core 2 on Athlon kernel 2.6.9-1.6_FC2smp ...
      (Fedora)
    • Eicon Diva ISDN trouble
      ... I am trying to get a PCI Eicon DIVA 2.0 S/T ISDN card working on a ... HiSax: Linux Driver for passive ISDN cards ...
      (Debian-User)