USB Sense Errors When Plugging in Flash Disk

From: Robert L Cochran (cochranb_at_speakeasy.net)
Date: 12/31/04

  • Next message: Terry Polzin: "Re: Network Printer - Help too please" 
    Date: Thu, 30 Dec 2004 21:33:14 -0500
To: For users of Fedora Core releases <fedora-list@redhat.com>

    Whenever I plug in my A-Data USB flash drive, these messages appear in
    /var/log/messages. Is there a fix for the errors?

    Dec 30 21:24:18 bobcp4 kernel: usb 1-5: new high speed USB device using
    address 5
    Dec 30 21:24:18 bobcp4 kernel: scsi6 : SCSI emulation for USB Mass
    Storage devices
    Dec 30 21:24:18 bobcp4 kernel: Vendor: USB 2.0 Model: Flash
    Disk Rev: 0.00
    Dec 30 21:24:18 bobcp4 kernel: Type:
    Direct-Access ANSI SCSI revision: 02
    Dec 30 21:24:18 bobcp4 kernel: SCSI device sdc: 1024000 512-byte hdwr
    sectors (524 MB)
    Dec 30 21:24:18 bobcp4 kernel: sdc: Write Protect is off
    Dec 30 21:24:18 bobcp4 kernel: sdc: assuming drive cache: write through
    Dec 30 21:24:18 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code
    = 8000002
    Dec 30 21:24:18 bobcp4 kernel: Sense class 7, sense error 0, extended
    sense 0
    Dec 30 21:24:19 bobcp4 kernel: sdc: sdc1
    Dec 30 21:24:19 bobcp4 kernel: Attached scsi removable disk sdc at
    scsi6, channel 0, id 0, lun 0
    Dec 30 21:24:19 bobcp4 scsi.agent[7069]: disk at
    /devices/pci0000:00/0000:00:02.2/usb1/1-5/1-5:1.0/host6/6:0:0:0
    Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code
    = 8000002
    Dec 30 21:24:19 bobcp4 kernel: Sense class 7, sense error 0, extended
    sense 0
    Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code
    = 8000002
    Dec 30 21:24:19 bobcp4 kernel: Sense class 7, sense error 0, extended
    sense 0
    Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code
    = 8000002
    Dec 30 21:24:19 bobcp4 kernel: Sense class 7, sense error 0, extended
    sense 0
    Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code
    = 8000002
    Dec 30 21:24:19 bobcp4 kernel: Sense class 7, sense error 0, extended
    sense 0
    Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code
    = 8000002
    Dec 30 21:24:19 bobcp4 kernel: Sense class 7, sense error 0, extended
    sense 0
    Dec 30 21:24:19 bobcp4 fstab-sync[7156]: added mount point
    /media/usbdisk for /dev/sdc1
    Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code
    = 8000002
    Dec 30 21:24:19 bobcp4 kernel: Sense class 7, sense error 0, extended
    sense 0

    This is on an MSI K8N Neo2 Platinum (Socket 939 -- AMD 64) motherboard.
    I am running Fedora Core 3 x86_64, which is kept fully up-to-date with
    the latest updates, on this. I also see the same messages on a Pentium 4
    system I just installed Fedora Core 3 (x86) on. That system is also
    fully up-to-date.

    Thanks

    Bob Cochran 

    -- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
  • Next message: Terry Polzin: "Re: Network Printer - Help too please"

    Relevant Pages