FC2 - CD Drive installation or Cdrecord setup Problem

From: David Curry (dsccable_at_comcast.net)
Date: 01/28/05

  • Next message: Paul Howarth: "Re: creating a sysv script" 
    Date: Fri, 28 Jan 2005 02:52:32 -0500
To: For users of Fedora Core releases <fedora-list@redhat.com>

    Help please. CDrom and CD-RW drives read just fine. Unable to burn
    cds with CD-RW.
    Using FC2 kernel 2.6.10-1.9 on AMD cpu system

     fstab is

    LABEL=/ / ext3 defaults 1 1
    LABEL=/boot /boot ext3 defaults 1 2
    none /dev/pts devpts gid=5,mode=620 0 0
    none /dev/shm tmpfs defaults 0 0
    none /proc proc defaults 0 0
    none /sys sysfs defaults 0 0
    /dev/hda3 swap swap defaults 0 0
    /dev/cdrom /mnt/cdrom udf,iso9660
    noauto,user,kudzu,rw 0 0
    /dev/cdrom1 /mnt/cdrom1 udf,iso9660
    noauto,user,kudzu,ro 0 0
    /dev/fd0 /mnt/floppy auto
    noauto,user,kudzu 0 0

    NOTE: Nautilus sees the CD devices as CD-ROM and CD-ROM2.

    -----------------------------------------------------------------------------------------------

    cdrecord.conf is
    #ident @(#)cdrecord.dfl 1.4 02/07/07 Copyr 1998 J. Schilling
    #
    # This file is /etc/cdrecord.conf
    # It contains defaults that are used if no command line option
    # or environment is present.
    #
    # The default device, if not specified elswhere
    #
    CDR_DEVICE=cdrom

    cdrom=1,0,0 -1 -1 burnfree

    Note: Specification of cdrom=0,0,0 or cdrom=1,0,0 per scanbus output
    produces the same result.
    I have also tried cdrom=ATAPI:0,0,0 per google search findings.
    ---------------------------------------------------------------------------------------------

    cdrecord -scanbus gives

    scsidev: 'ATA'
    devname: 'ATA'
    scsibus: -2 target: -2 lun: -2
    Linux sg driver version: 3.5.27
    cdrecord: Warning: using inofficial libscg transport code version
    (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83
    04/05/20 Copyright 1997 J. Schilling').
    cdrecord: Warning: controller returns wrong size for CD capabilities page.
    Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
    Schilling
    Note: This version is an unofficial (modified) version with DVD support
    Note: and therefore may have bugs that are not present in the original.
    Note: Please send bug reports or support requests to
    http://bugzilla.redhat.com/bugzilla
    Note: The author of cdrecord should not be bothered with problems in
    this version.
    Using libscg version 'schily-0.8'.
    scsibus1:
        1,0,0 100) 'ATAPI ' 'CD-R/RW 24X10 ' 'P.MJ' Removable CD-ROM
        1,1,0 101) 'LITEON ' 'CD-ROM LTN301 ' 'MM07' Removable CD-ROM
        1,2,0 102) *
        1,3,0 103) *
        1,4,0 104) *
        1,5,0 105) *
        1,6,0 106) *
        1,7,0 107) *

    -------------------------------------------------------------------------------------------

    K3b-debug output is
    System
    -----------------------
    K3b Version:0.11.14
    KDE Version: 3.2.2-12.FC2 Red Hat
    QT Version: 3.3.3

    cdrecord
    -----------------------
    scsidev: '/dev/hdc'
    devname: '/dev/hdc'
    scsibus: -2 target: -2 lun: -2
    Linux sg driver version: 3.5.27
    /usr/bin/cdrecord: Warning: using inofficial libscg transport code
    version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c
    1.83 04/05/20 Copyright 1997 J. Schilling').
    SCSI buffer size: 64512
    Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004
    Jörg Schilling
    Note: This version is an unofficial (modified) version with DVD support
    Note: and therefore may have bugs that are not present in the original.
    Note: Please send bug reports or support requests to
    http://bugzilla.redhat.com/bugzilla
    Note: The author of cdrecord should not be bothered with problems in
    this version.
    TOC Type: 3 = CD-ROM XA mode 2
    Using libscg version 'schily-0.8'.
    Driveropts: 'burnfree'
    atapi: 1
    Device type : Removable CD-ROM
    Version : 0
    Response Format: 1
    Vendor_info : 'ATAPI '
    Identifikation : 'CD-R/RW 24X10 '
    Revision : 'P.MJ'
    Device seems to be: Generic mmc CD-RW.
    Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
    Driver flags : MMC SWABAUDIO BURNFREE
    Supported modes: TAO PACKET SAO RAW/R16 RAW/R96R
    Drive buf size : 1630208 = 1592 KB
    FIFO size : 4194304 = 4096 KB
    Track 01: data 63 MB
    Total size: 72 MB (07:13.28) = 32496 sectors
    Lout start: 73 MB (07:15/21) = 32496 sectors
    Current Secsize: 2048
    ATIP info from disk:
      Indicated writing power: 2
      Reference speed: 6
      Is not unrestricted
      Is erasable
      Disk sub type: High speed Rewritable (CAV) media (1)
      ATIP start of lead in: -11077 (97:34/23)
      ATIP start of lead out: 336075 (74:43/00)
      1T speed low: 4 1T speed high: 10
      power mult factor: 2 6
      recommended erase/write power: 5
      A1 values: 24 2C DC
      A2 values: 00 00 00
      A3 values: 00 00 00
    Disk type: Phase change
    Manuf. index: 11
    Manufacturer: Mitsubishi Chemical Corporation
    Blocks total: 336075 Blocks current: 336075 Blocks remaining: 303579
    Speed set to 1760 KB/s
    Starting to write CD/DVD at speed 10.0 in real SAO mode for single session.
    Last chance to quit, starting real write in 2 seconds.
       1 seconds.
       0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    trackno=0
    BURN-Free is OFF.
    Turning BURN-Free on
    Performing OPC...
    Sending CUE ***...
    /usr/bin/cdrecord: CUE *** not accepted. Retrying with minimum
    pregapsize = 1.
    /usr/bin/cdrecord: Success. send_cue_***: scsi sendcmd: no error
    CDB: 5D 00 00 00 00 00 00 00 20 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
    Sense Key: 0x2 Not Ready, Segment 0
    Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
    Sense flags: Blk 0 (not valid)
    resid: 32
    cmd finished after 0.010s timeout 200s
    /usr/bin/cdrecord: CUE *** still not accepted. Please try to write in
    RAW (-raw96r) mode.
    /usr/bin/cdrecord: Cannot send CUE ***.
    /usr/bin/cdrecord: Could not write Lead-in.
    Writing time: 2.367s
    /usr/bin/cdrecord: fifo had 64 puts and 0 gets.
    /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
    100%.

    cdrecord comand:
    -----------------------
    /usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=10 -dao
    driveropts=burnfree -eject -xa1 /tmp/kde-root/k3b_0.iso 

    -- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
  • Next message: Paul Howarth: "Re: creating a sysv script"