Re: Display goes bad, seemingly randomly, during install of FC3

From: Arthur Pemberton (dalive_at_flashmail.com)
Date: 02/10/05

  • Next message: Thomas Cameron: "Re: Display goes bad, seemingly randomly, during install of FC3" 
    Date: Wed, 09 Feb 2005 22:45:19 -0400
To: For users of Fedora Core releases <fedora-list@redhat.com>

    Bill Gradwohl wrote:

    > Arthur Pemberton wrote:
    >
    >> I'm currently talking my friend through and FC3 install over the
    >> phone. Her video card and monitor seem to get properly detected.
    >> However, seemingly randomly, the display goes bad as what she
    >> describes as a "barcode with color" like display. THe first time this
    >> happened on Anaconda launch. The second time happened while she was
    >> choosign the timezone on the map. The third happened while she was
    >> customizing the packages. As I type she's rebooting and start fresh
    >> from memory of my instructions.
    >>
    >> Any ideas on what ould be causign this? I've never encountered such
    >> before.
    >
    >
    > Try taking down the screen resolution a notch. Sounds like the monitor
    > can't take certain frequencies. By reducing your res, it MAY help.
    > This could be a bad/borderline monitor issue. See if X is configured
    > with the proper frequencies that the monitor can handle. Check the
    > actual spec for the monitor, and fix the config file manually if
    > necessary.
    >
    > Alternatively, on some MOBO's, the video is built in. The BIOS is
    > usually set at some minimum RAM size for the video. I ALWAYS up that
    > to 32Meg. Even 64Meg if its available. If detection got the specs
    > wrong it can lead to what she's seeing.
    >
    > Also, go thru the BIOS to make sure you have PLUG&PLAY set to yes
    > since FC3 can make use of additional BIOS input as part of the install
    > process. While in the BIOS, check all the settings for reasonableness,
    > and turn off stuff she'll never use like serial ports, parallel ports,
    > extra IDE channels, etc.
    >
    Ok thanks for the detailed suggestion. I'll attempt this myself next visit. 

    -- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
  • Next message: Thomas Cameron: "Re: Display goes bad, seemingly randomly, during install of FC3"

    Relevant Pages

    • Re: still no resolution solution..
      ... & still unable to achieve 1600x1200 display, ... motherboard w/ sapphire radeon 4650 video card. ... driving a dell m782 monitor (same monitor was ... Module "ddc" already built-in ...
      (Fedora)
    • Re: Boot Up issue--sign of infection?
      ... If your system has an actual video board, ... The cable that runs between your monitor and the computer could be ... The first thing I thought of was CMOS battery. ... Three notes regarding your bios in passing: ...
      (microsoft.public.security.virus)
    • Re: Video plays then goes blank
      ... I meant the DVI cable that plugs into the monitor - the video cable. ... You are going to download and install this program ... Rather than perform a cold shutdown, have you tried Task Manager ...
      (microsoft.public.windowsxp.video)
    • Re: No video on Octane
      ... failing in results on either of those, video hardware. ... monitor click several times which sounds like what I'd expect during ... Unfortunately I'd introduce this strange 3rd party adapter. ... monitor itself is an SGI with a model number of GDM20-D11. ...
      (comp.sys.sgi.hardware)
    • Re: Is NVIDIA PureVideo a success?
      ... > resolution for that display to match the 720P I would like to run in. ... > connecting an HDTV up as a monitor. ... Windows uses a technology called "Video Overlay" to render ...
      (microsoft.public.windows.mediacenter)
    Loading