FC3 - 64 bit on Gigabyte GA-K8NPRO

From: Brian Walter (amatin_at_comcast.net)
Date: 04/28/05

  • Next message: Robin Laing: "Re: slow motion movie player" 
    To: fedora-list@redhat.com
Date: Thu, 28 Apr 2005 14:13:36 +0000

    Greetings,

    I've been trying to install fc3 - 64 bit on a Gigabyte GA-K8NPRO motherboard, with athlon 64 3000. It is, at best, not good. I keep gettin hangs at different places in the boot process.

    I was just wondering if anyone else on the list has installed 64 bit on with this motherboard? I've had the 32 bit version running on it with no problem.

    For what's it worth, here's the specs:

    Chipset

       1. NVIDIA nForce3 150 Platform Processor
       2. Super I/O: ITE IT8712F chip
       3. Integrated Peripherials
             1. Silicon Image sil3512 controller
             2. GigaRAID ATA 133 RAID controller
             3. T.I. IEEE1394 controller
             4. Realtek 8110S Gigabit Ethernet controller
             5. Realtek ALC658 Audio AC'97 Codec

    Memory

       1. Type: DDR400/ 333/ 266- 184pin

    Internal I/O Connectors

       1. 2 x Serial ATA connector
       2. 4 x UDMA ATA 133/100/66 Bus Master IDE connectors
       3. 1 x FDD connector
       4. 2 x USB 2.0/1.1 connectors (supports 4 ports)
       5. 2 x IEEE 1394 connectors (supports 3 ports)
       6. S/P DIF input/output pin header
       7. 3 x cooling fan pin headers
       8. CD/AUX in
       9. 1 x Game/Midi connector

    Expansion Slots

       1. 1 x AGP slot (8x/4x-AGP 3.0 compliant), supports 1.5v display card only.
       2. 5 x PCI slots (PCI 2.3 compliant) 

    -- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
  • Next message: Robin Laing: "Re: slow motion movie player"

    Relevant Pages

    • Re: What is this Amdek card??
      ... RGB style inputs, such as SCART. ... D connector on the back. ... with a rather large card and a daughter card with an 8 pin output. ... My card doesn't have the 10 pin header, only the 16 pin header, and only two switches in the dip-switch. ...
      (comp.sys.apple2)
    • Re: Playboy (1978) Dead Flipper
      ... Connector and pin header are ... Is there a transistor on the solenoid drive board that I ... It was a bad solder connection on a pin header running to ...
      (rec.games.pinball)
    • Re: Hi speed USB PCB layout
      ... spec's requirements by enough to give you some flexibility. ... recent board puts high-speed USB over a 1mm-pitch pin header to a ... connector, and it seems to work (the tracks are maybe 5cm long and are ...
      (sci.electronics.design)
    Loading